ASTM 7906-14 - Solution Using Toluene and the Rotary Evaporator
ASTM A1007-15 - Carbon Steel Wire for Wire Rope
ASTM A1008/A1008M-15 - Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
ASTM A1011/A1011M-14 (Repl A569/A569M,A570/A570M) - Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy and High-Strength Low-Alloy with Improved Formability
ASTM A1018/A1018M-15 - Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
ASTM A1022/A1022M-15 - Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
ASTM A1023/A1023M-15 - Stranded Carbon Steel Wire Ropes for General Purposes
ASTM A1024/A1024M-02(2012) - Steel Line Pipe, Black, Plain-End, Seamless
ASTM A1031/A1031M-12 - Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
ASTM A1032-04(2015) - Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
ASTM A1034/A1034M-10a - Testing Mechanical Splices for Steel Reinforcing Bars
ASTM A1035/A1035M-15 - Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
ASTM A1044/A1044M-15 - Steel Stud Assemblies for Shear Reinforcement of Concrete
ASTM A105/A105M-14 - Carbon Steel Forgings for Piping Applications
ASTM A1055/A1055M-10e1 - Zinc and Epoxy Dual Coated Steel Reinforcing Bars
ASTM A1057/A1057M-08(2014) - Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
ASTM A1060/A1060M-14 - Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A1061/A1061M-09 - Testing Multi-Wire Steel Strand
ASTM A1063/A1063M-11a - Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
ASTM A1064/A1064M-15 - Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
ASTM A1075-12 - Flanged Steel U-Channel Posts
ASTM A1078/A1078M-12e1 - Epoxy-Coated Steel Dowels for Concrete Pavement
ASTM A108-13 - Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A1094/A1094M-15 - Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement
ASTM A116-11 - Metallic-Coated, Steel Woven Wire Fence Fabric
ASTM A123/A123M-15 - Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
ASTM A126-04(2014) - Gray Iron Castings for Valves, Flanges, and Pipe Fittings
ASTM A134-96(2012) - Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
ASTM A135/A135M-09(2014) - Electric-Resistance-Welded Steel Pipe
ASTM A139/A139M-04(2010) - Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
ASTM A139/A139M-16 - Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
ASTM A143/A143M-07 - Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
ASTM A148/A148M-15a - Steel Castings, High Strength, for Structural Purposes
ASTM A153/A153M-05 - Zinc Coating (Hot-Dip) on Iron and Steel Hardware
ASTM A153/A153M-09 - Zinc Coating (Hot-Dip) on Iron and Steel Hardware
ASTM A167-99(2009) - Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
ASTM A182/A182M-15 - Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
ASTM A183-14 - Carbon Steel Track Bolts and Nuts
ASTM A184/A184M-06(2011) - Welded Deformed Steel Bar Mats for Concrete Reinforcement
ASTM A185-02 - Steel Welded Wire Reinforcement, Plain, for Concrete
ASTM A193/A193M-14a - Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature or High Pressure Service and Other Special Purpose Applications
ASTM A194/A194M-15 - Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
ASTM A216/A216M-14e1 - Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
ASTM A227/A227M-06(2011) - Steel Wire, Cold-Drawn for Mechanical Springs
ASTM A239-14 - Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
ASTM A240/A240M-14 - Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
ASTM A242/A242M-13 - High-Strength Low-Alloy Structural Steel
ASTM A252-10 - Welded and Seamless Steel Pipe Piles
ASTM A252-98e1 - Welded and Seamless Steel Pipe Piles
ASTM A27/A27M-13 - Steel Castings, Carbon for General Application
ASTM A276/A276M-15 - Stainless Steel Bars and Shapes
ASTM A276-04 - Stainless Steel Bars and Shapes
ASTM A276-08A - Stainless Steel Bars and Shapes
ASTM A283/A283M-13 - Low and Intermediate Tensile Strength Carbon Steel Plates
ASTM A285/A285M-12 - Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
ASTM A29/A29M-12e1 - Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
ASTM A304-11 - Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
ASTM A307-14E1 - Carbon Steel Bolts and Studs, and Threaded Rod 60 000 PSI Tensile Strength
ASTM A308/A308M-10 - Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
ASTM A311/A311M-04(2015) - Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
ASTM A312/A312M-15b - Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A312/A312M-17 - Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
ASTM A313/A313M-10e1 - Stainless Steel Spring Wire
ASTM A314-15 - Stainless Steel Billets and Bars for Forging
ASTM A320/A320M-15a - Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service
ASTM A325M-14 - Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)
ASTM A328/A328M-13a - Steel Sheet Piling
ASTM A333/A333M-13 - Seamless and Welded Steel Pipe for Low-Temperature Service
ASTM A336/A336M-10a - Alloy Steel Forgings for Pressure and High-Temperature Parts
ASTM A351/A351M-15 - Castings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-Containing Parts
ASTM A354-11 - Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
ASTM A36/A36M-08 - Carbon Structural Steel
ASTM A36/A36M-14 - Carbon Structural Steel
ASTM A368-95a(2013) - Stainless Steel Wire Strand
ASTM A370-14 - Mechanical Testing of Steel Products
ASTM A377-03(2008)e1 - Standard Index of Specifications for Ductile-Iron Pressure Pipe
ASTM A388/A388M-15 - Ultrasonic Examination of Steel Forgings
ASTM A392-11a - Zinc-Coated Steel Chain-Link Fence Fabric
ASTM A394-08e1 - Steel Transmission Tower Bolts, Zinc-Coated and Bare
ASTM A403/A403M-13 - Wrought Austenitic Stainless Steel Piping Fittings
ASTM A407-07(2013) - Steel Wire, Cold-Drawn, for Coiled-Type Springs
ASTM A416/A416M-02 - Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
ASTM A416/A416M-12a - Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
ASTM A421/A421M-02 - Stress-Relieved Steel Wire for Prestressed Concrete
ASTM A421/A421M-10 - Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
ASTM A426/A426M-13 - Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
ASTM A428/A428M-10 - Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
ASTM A449-14 - Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
ASTM A47/A47M-99(2014) - Ferritic Malleable Iron Castings
ASTM A474-03(2013) - Aluminum-Coated Steel Wire Strand
ASTM A48/A48M-03(2012) - Gray Iron Castings
ASTM A480/A480M-15 - General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
ASTM A484/A484M-15 - General Requirements for Stainless Steel Bars, Billets, and Forgings
ASTM A489-12 - Carbon Steel Lifting Eyes
ASTM A490M-14a - High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
ASTM A491-11 - Aluminum-Coated Steel Chain-Link Fence Fabric
ASTM A492-95(2009) - Stainless Steel Rope Wire
ASTM A493-09 - Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
ASTM A496-02 - Steel Wire, Deformed, for Concrete Reinforcement
ASTM A497/A497M-02 - Steel Welded Wire Reinforcement, Deformed, for Concrete
ASTM A497/A497M-07 - Steel Welded Wire Reinforcement, Deformed, for Concrete
ASTM A499-15 - Steel Bars and Shapes, Carbon Rolled from "T" Rails
ASTM A500/A500M-10a - Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
ASTM A502-03(2015) - Rivets, Steel, Structural
ASTM A510/A510M-13 - General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel (Metric)
ASTM A513/A513M-12 - Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
ASTM A518/A518M-99(2012) - Corrosion-Resistant High-Silicon Iron Castings
ASTM A519-06 - Seamless Carbon and Alloy Steel Mechanical Tubing
ASTM A522/A522M-11 - Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
ASTM A53/A53M-12 - Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
ASTM A532/A532M-10 - Abrasion-Resistant Cast Irons
ASTM A536-84 - Ductile Iron Castings
ASTM A551/A551M-08 - Carbon Steel Tires for Railway and Rapid Transit
ASTM A555/A555M-05(2014) - General Requirements for Stainless Steel Wire and Wire Rods
ASTM A563M-07(2013) - Carbon and Alloy Steel Nuts (Metric)
ASTM A564/A564M-10 - Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
ASTM A568/A568M-14 - Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled
ASTM A574M-12 - Alloy Steel Socket-Head Cap Screws (Metric)
ASTM A576-90b(2012) - Steel Bars, Carbon, Hot-Wrought, Special Quality
ASTM A580/A580M-15 - Stainless Steel Wire
ASTM A588/A588M-15 - High-Strength Low-Alloy Structural Steel 50 ksi [345 MPa] Min Yield Point, with Atmospheric Corrosion Resistance
ASTM A6/A6M-13a - General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
ASTM A603-98(2014) - Zinc-Coated Steel Structural Wire Rope
ASTM A606/A606M-09a - Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
ASTM A609/A609M-91(2007) - Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
ASTM A615/A615M-15a - Deformed and Plain Billet-Steel Bars for Concrete Reinforcement
ASTM A635/A635M-14 - Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
ASTM A641/A641M-09a(2014) - Zinc-Coated (Galvanized) Carbon Steel Wire
ASTM A648-12 - Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
ASTM A653/A653M-15 - Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A663/A663M-12 - Steel Bars, Carbon, Merchant Quality, Mechanical Properties
ASTM A666-15 - Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
ASTM A668/A668M-14 - Steel Forgings, Carbon and Alloy, for General Industrial Use
ASTM A684/A684M-14 - Steel, Strip, High-Carbon, Cold-Rolled
ASTM A702-13 - Steel Fence Posts and Assemblies, Hot Wrought
ASTM A704/A704M-06(2011) - Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
ASTM A706/A706M-15 - Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
ASTM A709/A709M-13a - Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges
ASTM A716-08(2014) - Ductile Iron Culvert Pipe
ASTM A722/A722M-15 - Uncoated High-Strength Steel Bar for Prestressing Concrete
ASTM A722/A722M-98 (2003) - Uncoated High-Strength Steel Bar for Prestressing Concrete
ASTM A741-11e1 - Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
ASTM A74-15 - Cast Iron Soil Pipe and Fittings
ASTM A742/A742M-13 - Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
ASTM A743/A743M-13a - Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
ASTM A746-09(2014) - Ductile Iron Gravity Sewer Pipe
ASTM A751-14a - Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
ASTM A760/A760M-15 - Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
ASTM A761/A761M-15 - Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
ASTM A762/A762M-15 - Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
ASTM A764-12 - Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
ASTM A767/A767M-09 - Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
ASTM A775/A 775M-06 - Epoxy-Coated Steel Reinforcing Bars
ASTM A775/A775M-07b Annex A1 - Epoxy-Coated Steel Reinforcing Bars (chemical resistance, cathodic disbondment, salt spray resistance, chloride permeability, coating flexibility, relative bond strength, abrasion resistance, impact r
ASTM A775/A775M-07b(2014) - Epoxy-Coated Steel Reinforcing Bars
ASTM A778/A778M-16 - Welded, Unannealed Austenitic Stainless Steel Tubular Products
ASTM A779/A779M-12 - Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
ASTM A780/A780M-09(2015) - Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
ASTM A780-01 - Repair for Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
ASTM A787/A787M-09 - Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
ASTM A792/A792M-10(2015) - Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A795/A795M-13 - Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
ASTM A796/A796M-15a - Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
ASTM A798/A798M-07 - Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
ASTM A799/A799M-10 - Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
ASTM A807/A807M-13 - Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
ASTM A815/A815M-13a - Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
ASTM A817-12 - Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
ASTM A820/A820M-11 - Steel Fibers for Fiber-Reinforced Concrete
ASTM A82-02 - Steel Wire, Plain, for Concrete Reinforcement
ASTM A821/A821M-15 - Steel Wire, Hard Drawn for Prestressing Concrete Tanks
ASTM A824-01(2012) - Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
ASTM A849-15 - Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
ASTM A854/A854M-08(2013) - Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
ASTM A858/A858M-13 - Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
ASTM A871/A871M-14 - High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
ASTM A872/A872M-07a(2012) - Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
ASTM A881/A881M-10 - Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
ASTM A882/A882M-04a(2010) - Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
ASTM A884/A884M-14 - Epoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement
ASTM A886/A886M-12 - Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
ASTM A888-15 - Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
ASTM A899-91(2014) - Steel Wire, Epoxy-Coated
ASTM A90/A90M-13 - Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
ASTM A910/A910M-12 - Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
ASTM A924/A924M-14 - General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
ASTM A929/A929M-01(2013) - Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
ASTM A930-09(2014) - Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
ASTM A931-08(2013) - Tension Testing of Wire Ropes and Strand
ASTM A933/A933M-14 - Vinyl-Coated Steel Wire and Welded Wire Reinforcement
ASTM A934/A934M-13 - Epoxy-Coated Prefabricated Steel Reinforcing Bars
ASTM A944-10(2015) - Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
ASTM A955/A955M-04a - Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
ASTM A955/A955M-15 - Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
ASTM A961/A961M-14 - Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
ASTM A967-05e2 - Chemical Passivation Treatments for Stainless Steel Parts
ASTM A970/A970M-15e1 - Headed Steel Bars for Concrete Reinforcement
ASTM A974-97(2011) - Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
ASTM A975-11 - Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
ASTM A978/A978M-08(2013) - Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
ASTM A992/A992M-11(2015) - Structural Steel Shapes
ASTM A996/A996M-15 - Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
ASTM B108/B108M-14 - Aluminum-Alloy Permanent Mold Castings
ASTM B1-13 - Hard-Drawn Copper Wire
ASTM B117-11 - Operating Salt Spray (Fog) Apparatus
ASTM B137-95(2014) - Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum
ASTM B138/B138M-11 - Manganese Bronze Rod, Bar, and Shapes
ASTM B148-14 - Aluminum-Bronze Sand Castings
ASTM B16/B16M-10 - Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
ASTM B209-14M - Aluminum and Aluminum-Alloy Sheet and Plate [Metric]
ASTM B22/B22M-15 - Bronze Castings for Bridges and Turntables
ASTM B221-08 - Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B221-13 - Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
ASTM B240-13 - Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
ASTM B26/B26M-14e1 - Aluminum-Alloy Sand Castings
ASTM B265-13 - Titanium and Titanium Alloy Strip, Sheet, and Plate
ASTM B271/B271M-11e1 - Copper-Base Alloy Centrifugal Castings
ASTM B272-12 - Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)
ASTM B30-14a - Copper Alloys in Ingot Form
ASTM B3-13 - Soft or Annealed Copper Wire
ASTM B316/B316M-10 - Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
ASTM B36/B36M-13 - Brass Plate, Sheet, Strip, and Rolled Bar
ASTM B418-01 - Cast and Wrought Galvanic Zinc Anodes
ASTM B418-12 - Cast and Wrought Galvanic Zinc Anodes
ASTM B447-12 - Welded Copper Tube
ASTM B449-93(2015) - Chromates on Aluminum
ASTM B452-09 - Copper-Clad Steel Wire for Electronic Application
ASTM B487-85(2013) - Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of a Cross-Section
ASTM B498/B498M-08 - Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
ASTM B499-09 (2014) - Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals
ASTM B584-14 - Copper Alloy Sand Castings for General Applications
ASTM B6-13 - Zinc
ASTM B62-09 - Composition Bronze or Ounce Metal Castings
ASTM B633-13 - Electrodeposited Coatings of Zinc on Iron and Steel
ASTM B69-13 - Rolled Zinc
ASTM B695-04(2009) - Coatings of Zinc Mechanically Deposited on Iron and Steel
ASTM B698-10 - Seamless Copper and Copper Alloy Plumbing Pipe and Tube
ASTM B746/B746M-02(2012) - Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches and Arches
ASTM B750-12 - GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings
ASTM B766-86(2015) - Electrodeposited Coatings of Cadmium
ASTM B789/B789M-99(2011) - Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
ASTM B790/B790M-11 - Structural Design of Corrugated Aluminum Pipe, Pipe-Arches and Arches for Culverts, Storm Seers, and Other Buried Conduits
ASTM B833-13 - Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
ASTM B843-13 - Magnesium Alloy Anodes for Cathodic Protection
ASTM B864/B864M-13 - Corrugated Aluminum Box Culverts
ASTM B88-09 - Seamless Copper Water Tube
ASTM B88M-14 - Seamless Copper Water Tube (Metric)
ASTM B905-00(2010) - Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
ASTM B927/B927M-13 - Brass Rod, Bar, and Shapes
ASTM B965-09(2014) - High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability
ASTM C10/C10M-14 - Natural Cement
ASTM C1005-10 - Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
ASTM C1007-11a(2015) - Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
ASTM C1012/C1012M-15 - Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
ASTM C1016-14 - Determination of Water Absorption of Sealant Backing
ASTM C1017/C1017M-13e1 - Chemical Admixtures for Use in Producing Flowing Concrete
ASTM C1019-14 - Sampling and Testing Grout
ASTM C1028-07e1 - Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM C1029-15 - Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
ASTM C1038/C1038M-14b - Expansion of Hydraulic Cement Mortar Bars Stored in Water
ASTM C1059/C1059M-13 - Latex Agents for Bonding Fresh To Hardened Concrete
ASTM C1064/C1064M-12 - Temperature of Freshly Mixed Portland Cement Concrete
ASTM C1072-13e1 - Measurement of Masonry Flexural Bond Strength
ASTM C1077-15a - Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
ASTM C1083-06(2011) - Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
ASTM C1089-13 - Spun Cast Prestressed Concrete Poles
ASTM C109/C109M-13e1 - Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C1090-10 - Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
ASTM C1091-03a(2013) - Hydrostatic Infiltration and Exfiltration Testing of Vitrified Clay Pipe Lines
ASTM C110-15 - Physical Testing of Quicklime, Hydrated Lime, and Limestone
ASTM C1103M-14 - Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric]
ASTM C1104/C1104M-13a - Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
ASTM C1107/C1107M-14a - Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
ASTM C1116/C1116M-10a(2015) - Fiber-Reinforced Concrete and Shotcrete
ASTM C1131-10(2015) - Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
ASTM C1134-90(2007)e1 - Water Retention of Rigid Thermal Insulations Following Partial Immersion
ASTM C1135-00(2011) - Determining Tensile Adhesion Properties of Structural Sealants
ASTM C1140/C1140M-14 - Preparing and Testing Specimens from Shotcrete Test Panels
ASTM C1141/C1141M-08 - Admixtures for Shotcrete
ASTM C114-15 - Chemical Analysis of Hydraulic Cement
ASTM C1147-01(2012) - Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
ASTM C1152/C1152M-04(2012)e1 - Acid-Soluble Chloride in Mortar and Concrete
ASTM C1157/C1157M-11 - Hydraulic Cement
ASTM C117-13 - Materials Finer than 75-[mu]m (No. 200) Sieve in Mineral Aggregates by Washing
ASTM C1173-10(2014) - Flexible Transition Couplings for Underground Piping Systems
ASTM C118-15 - Concrete Pipe for Irrigation or Drainage
ASTM C1183/C1183M-13 - Extrusion Rate of Elastomeric Sealants
ASTM C1184-14 - Structural Silicone Sealants
ASTM C118M-15 - Concrete Pipe for Irrigation or Drainage (Metric)
ASTM C1202-12 - Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
ASTM C1208/C1208M-11 - Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
ASTM C12-14 - Installing Vitrified Clay Pipe Lines
ASTM C1214M-13 - Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
ASTM C1216/C1216M-13 - Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
ASTM C1222-13e1 - Evaluation of Laboratories Testing Hydraulic Cement
ASTM C1227-13 - Precast Concrete Septic Tanks
ASTM C123/C123M-14 - Lightweight Particles in Aggregate
ASTM C1240-15 - Silica Fume Used in Cementitious Mixtures
ASTM C1244-11 - Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill [Metric]
ASTM C1246-00(2012) - Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
ASTM C1247-14 - Durability of Sealants Exposed to Continuous Immersion in Liquids
ASTM C125-15a - Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C1260-14 - Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
ASTM C1262-10 - Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
ASTM C1266-02(2011) - Flow Characteristics of Preformed Tape Sealants
ASTM C127-15 - Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
ASTM C1272-14b - Heavy Vehicular Paving Brick
ASTM C128-15 - Specific Gravity and Absorption of Fine Aggregate
ASTM C129-14a - Nonloadbearing Concrete Masonry Units
ASTM C1292-10 - Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C1293-08b(2015) - Determination of Length Change of Concrete Due to Alkali-Silica Reaction
ASTM C1303/C1303M-14 - Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
ASTM C1305-08 - Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
ASTM C1306-08 - Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
ASTM C131-14 - Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C1315-11 - Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
ASTM C1319 - Concrete Grid Paving Units
ASTM C1325-14 - Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
ASTM C1338-14 - Determining Fungi Resistance of Insulation Materials and Facings
ASTM C136/C136M-14 - Sieve Analysis of Fine and Coarse Aggregates
ASTM C1372-14a - Dry-Cast Segmental Retaining Wall Units
ASTM C138/C138M-14 - Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
ASTM C1382-11 - Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
ASTM C139-14 - Concrete Masonry Units for Construction of Catch Basins and Manholes
ASTM C1399/C1399M-10(2015) - Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
ASTM C140/C140M-15 - Sampling and Testing Concrete Masonry Units and Related Units
ASTM C141/C141M-14 - Hydrated Hydraulic Lime for Structural Purposes
ASTM C14-15a - NonReinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
ASTM C1417M-15 - Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
ASTM C143/C143M-15 - Slump of Hydraulic Cement Concrete
ASTM C1433M-15 - Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers [Metric]
ASTM C1436-08 - Materials for Shotcrete
ASTM C1437-13 - Flow of Hydraulic Cement Mortar
ASTM C1438-13 - Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar
ASTM C1439-13 - Evaluating Latex and Powder Polymer Modifiers for use in Hydraulic Cement Concrete and Mortar
ASTM C144 - Masonry Mortar
ASTM C1440-08(2013)e1 - Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
ASTM C1442-11 - Conducting Tests on Sealants Using Artificial Weathering Apparatus
ASTM C1471/C1471M-05(2014)e1 - Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
ASTM C1478M-08(2013) - Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals [Metric]
ASTM C1479M-13 - Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
ASTM C1480/C1480M-07(2012) - Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
ASTM C1482-12 - Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
ASTM C14M-15a - Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe [Metric]
ASTM C150/C150M - Portland Cement
ASTM C1504M-15a - Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
ASTM C1522-05(2013) - Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
ASTM C1529-06a(2011) - Quicklime, Hydrated Lime, and Limestone for Environmental Uses
ASTM C1543-10a - Determining the Penetration of Chloride Ion into Concrete by Ponding
ASTM C1550-12a - Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
ASTM C1556-11a - Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
ASTM C156-05 - Water Retention by Liquid Membrane-Forming Curing Compounds for Concrete
ASTM C157/C157M-08(2014)e1 - Length Change of Hardened Hydraulic-Cement, Mortar, and Concrete
ASTM C1577-15b - Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
ASTM C158-02(2012) - Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1581/C1581M-09a - Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
ASTM C1582/C1582M-11 - Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
ASTM C1583/C1583M-13 - Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
ASTM C1585-13 - Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
ASTM C1594-11 - Polyimide Rigid Cellular Thermal Insulation
ASTM C1602/C1602M-12 - Mixing Water Used in the Production of Hydraulic Cement Concrete
ASTM C1604/C1604M-05(2012) - Obtaining and Testing Drilled Cores of Shotcrete
ASTM C1609/C1609M-12 - Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
ASTM C1610/C1610M-14 - Static Segregation of Self-Consolidating Concrete Using Column Technique
ASTM C1613-10 - Precast Concrete Grease Interceptor Tanks
ASTM C1618M-13 - Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)
ASTM C1619-11 - Elastomeric Seals for Joining Concrete Structures
ASTM C1621/C1621M-14 - Passing Ability of Self-Consolidating Concrete by J-Ring
ASTM C1622/C1622M-10 - Cold-Weather Admixture Systems
ASTM C1628-11 - Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
ASTM C1645 / C1645M-11 - Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
ASTM C1646/C1646M-08a - Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
ASTM C165-07 - Measuring Compressive Properties of Thermal Insulations
ASTM C1670-15 - Adhered Manufactured Stone Masonry Veneer (AMSMV) Units
ASTM C1675-11(2015) - Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
ASTM C1677-11a - Joints for Concrete Box, Using Rubber Gaskets
ASTM C1681-09 - Evaluating the Tear Resistance of a Sealant Under Constant Strain
ASTM C1688/C1688M-14a - Density and Void Content of Freshly Mixed Pervious Concrete
ASTM C1697-10 - Blended Supplementary Cementitious Materials
ASTM C170/C170M-15a - Compressive Strength of Dimension Stone
ASTM C1707-11 - Pozzolanic Hydraulic Lime for Structural Purposes
ASTM C1708/C1708M-15 - Self-leveling Mortars Containing Hydraulic Cements
ASTM C1709-11 - Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
ASTM C171 - Sheet Materials for Curing Concrete
ASTM C171-92 - Sheet Materials for Curing Concrete
ASTM C172/C172M-14a - Sampling Freshly Mixed Concrete
ASTM C173/C173M-14 - Air Content of Freshly Mixed Concrete by the Volumetric Method
ASTM C1738/C1738M-13 - High-Shear Mixing of Hydraulic Cement Pastes
ASTM C174 - Measuring Thickness of Concrete Elements Using Drilled Concrete
ASTM C174/C174M-13 - Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
ASTM C1740-10 - Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
ASTM C1741-12 - Bleed Stability of Cementitious Post-Tensioning Tendon Grout
ASTM C1745/C1745M-11 - Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
ASTM C1746/C1746M-12 - Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
ASTM C1747/C1747M-13 - Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
ASTM C1758/C1758M-15 - Fabricating Test Specimens with Self-Consolidating Concrete
ASTM C1761/C1761M-15 - Lightweight Aggregate for Internal Curing of Concrete
ASTM C1765-13 - Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM C177-10 - Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C1781/C1781M-1 - Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM C1802-14e1 - Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
ASTM C1804-14e1 - Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles
ASTM C185-15a - Standard Test Method for Air Content of Hydraulic Cement Mortar
ASTM C187-11e1 - Normal Consistency of Hydraulic Cement
ASTM C188-15 - Density of Hydraulic Cement
ASTM C191-13 - Time of Setting of Hydraulic Cement by Vicat Needle
ASTM C192/C192M-15 - Making and Curing Concrete Test Specimens in the Laboratory
ASTM C203-05a(2012) - Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C209-12 - Cellulosic Fiber Insulating Board
ASTM C215-14 - Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens
ASTM C216-15 - Facing Brick (Solid Masonry Units Made from Clay or Shale)
ASTM C219-13 - Hydraulic Cement
ASTM C226-12 - Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
ASTM C227-10 - Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
ASTM C230/C230M-14 - Flow Table for Use in Tests of Hydraulic Cement
ASTM C231/C231M-14 - Air Content of Freshly Mixed Concrete by the Pressure Method
ASTM C232/C232M-14 - Bleeding of Concrete
ASTM C233/C233M-14 - Air-Entraining Admixtures for Concrete, Standard Test Method
ASTM C25-11e1 - Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
ASTM C260/260M-10a - Air-Entraining Admixtures for Concrete
ASTM C266 - Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
ASTM C267-01(2012) - Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
ASTM C270-14a - Mortar for Unit Masonry
ASTM C272/C272M-12 - Water Absorption of Core Materials for Structural Sandwich Constructions
ASTM C273/C273M-11 - Shear Properties of Sandwich Core Materials
ASTM C29/C29M-09 - Bulk Density (Unit Weight) and Voids in Aggregate
ASTM C293/C293M-10 - Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
ASTM C294-12 - Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
ASTM C296/C296M-00(2015) - Asbestos-Cement Pressure Pipe
ASTM C297/C297M-15 - Flatwise Tensile Strength of Sandwich Constructions
ASTM C301-13 - Vitrified Clay Pipe
ASTM C303-10 - Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
ASTM C307-03(2012) - Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
ASTM C309-07 - Liquid Membrane-Forming Compounds for Curing Concrete
ASTM C31/C31M-15 - Making and Curing Concrete Test Specimens in the Field
ASTM C311/C311M-13 - Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete
ASTM C315-07(2011) - Clay Flue Linings
ASTM C33/C33M-13 - Concrete Aggregates
ASTM C330/C330M-09 - Lightweight Aggregates for Structural Concrete
ASTM C331/C331M-10 - Lightweight Aggregates for Concrete Masonry Units
ASTM C332-09 - Lightweight Aggregates for Insulating Concrete
ASTM C341/C341M-06 - Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
ASTM C348-14 - Flexural Strength of Hydraulic-Cement Mortars
ASTM C356-10 - Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
ASTM C359-13 - Early Stiffening of Hydraulic Cement (Mortar Method)
ASTM C361-05e1 - Reinforced Concrete Low-Head Pressure Pipe
ASTM C361-16 - Reinforced Concrete Low-Head Pressure Pipe
ASTM C361M-14a - Reinforced Concrete Low-Head Pressure Pipe [Metric]
ASTM C387/C387M-11b - Packaged, Dry, Combined Materials for Mortar and Concrete
ASTM C39 - Compressive Strength of Cylindrical Concrete Specimens
ASTM C39/C39M-15a - Compressive Strength of Cylindrical Concrete Specimens
ASTM C393/C393M-11e1 - Core Shear Properties of Sandwich Constructions by Beam Flexure
ASTM C403/C403M-08 - Time of Setting of Concrete Mixtures by Penetration Resistance
ASTM C4-04(2009) - Clay Drain Tile and Perforated Clay Drain Tile
ASTM C411-11 - Hot-Surface Performance of High-Temperature Thermal Insulation
ASTM C413-01(2012) - Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM C42/C42M-13 - Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
ASTM C423-09a - Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
ASTM C425-04(2013) - Compression Joints for Vitrified Clay Pipe and Fittings
ASTM C428/C428M-05(2011)e1 - Asbestos-Cement Nonpressure Sewer Pipe
ASTM C443M-12 - Joints for Concrete Pipe and Manholes, Using Rubber Gaskets [Metric]
ASTM C451-13 - Early Stiffening of Hydraulic Cement (Paste Method)
ASTM C457 - Microscopical Determination of Parameters of the Air Void System in Hardened Concrete
ASTM C457/C457M-12 - Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
ASTM C465-10 - Processing Additions for Use in the Manufacture of Hydraulic Cements
ASTM C469/C469M-14 - Static Modulus of Elasticity and Poisons's Ratio of Concrete in Compression
ASTM C473-12 - Physical Testing of Gypsum Panel Products
ASTM C476-10 - Grout for Masonry
ASTM C478M-15 - Precast Reinforced Concrete Manhole Sections (Metric)
ASTM C490/C490M-11e1 - Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C494/C494M-15 - Chemical Admixtures for Concrete
ASTM C495/C495M-12 - Compressive Strength of Lightweight Insulating Concrete
ASTM C496/C496M-11 - Splitting Tensile Strength of Cylindrical Concrete Specimens
ASTM C497M-15 - Concrete Pipe, Manhole Sections, or Tile [Metric]
ASTM C500/C500M-07(2011)e1 - Asbestos-Cement Pipe
ASTM C501-84 - Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
ASTM C506M-15 - Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe [Metric]
ASTM C507-12 - Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
ASTM C507M-14 - Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Metric]
ASTM C509-06(2011) - Elastomeric Cellular Preformed Gasket and Sealing Material
ASTM C510-05a(2011) - Staining and Color Change of Single- or Multicomponent Joint Sealants
ASTM C511-09 - Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
ASTM C512/C512M-10 - Creep of Concrete in Compression
ASTM C513/C513M-11e1 - Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
ASTM C518-10 - Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C531-00(2012) - Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM C534/C534M-14 - Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
ASTM C535-12 - Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
ASTM C553-13 - Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
ASTM C563-13 - Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
ASTM C564-14 - Rubber Gaskets for Cast Iron Soil Pipe and Fittings
ASTM C566-13 - Total Evaporable Moisture Content of Aggregate by Drying
ASTM C567/C567M-14 - Determining Density of Structural Lightweight Concrete
ASTM C578-15 - Rigid, Cellular Polystyrene Thermal Insulation
ASTM C579-01(2012) - Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings and Polymer Concretes
ASTM C580-02(2012) - Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
ASTM C581-03(2008)e1 - Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
ASTM C593-06(2011) - Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
ASTM C595/C595M-15 - Blended Hydraulic Cements
ASTM C596-09 - Drying Shrinkage of Mortar Containing Hydraulic Cement
ASTM C603-14 - Extrusion Rate and Application Life of Elastomeric Sealants
ASTM C612-04 - Mineral Fiber Block and Board Thermal Insulation
ASTM C617/C617M-15 - Capping Cylindrical Concrete Specimens
ASTM C618-15 - Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
ASTM C633-13 - Adhesion or Cohesion Strength of Thermal Spray Coatings
ASTM C639-15 - Rheological (Flow) Properties of Elastomeric Sealants
ASTM C641-09 - Iron Staining Materials in Lightweight Concrete Aggregates
ASTM C642-13 - Density, Absorption, and Voids in Hardened Concrete
ASTM C655M-15 - Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric]
ASTM C661-06(2011) - Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
ASTM C665-12 - Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
ASTM C666/C666M-03 Procedure A - Resistance of Concrete to Rapid Freezing and Thawing - Rapid Freezing and Thawing in Water
ASTM C666/C666M-03(2008) Procedure B - Resistance of Concrete to Rapid Freezing and Thawing - Rapid Freezing in Air and Thawing in Water
ASTM C666/C666M-03(2015) - Resistance of Concrete to Rapid Freezing and Thawing
ASTM C670-10 - Preparing Precision and Bias Statements for Test Methods for Construction Materials
ASTM C67-14 - Sampling and Testing Brick and Structural Clay Tile
ASTM C672/C672M-12 - Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
ASTM C672-84 - Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
ASTM C679-15 - Tack-Free Time of Elastomeric Sealants
ASTM C685/C685M-11 - Concrete Made by Volumetric Batching and Continuous Mixing
ASTM C686-90(2011)e1 - Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
ASTM C695-91(2010) - Compressive Strength of Carbon and Graphite
ASTM C697-10 - Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
ASTM C700-13 - Vitrified Clay Pipe , Extra Strength, Standard Strength, and Perforated
ASTM C702/C702M-11 - Reducing Samples of Aggregate to Testing Size
ASTM C711-14 - Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C712-14 - Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C717-13 - Standard Terminology of Building Seals and Sealants
ASTM C719-14 - Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
ASTM C744-14 - Prefaced Concrete and Calcium Silicate Masonry Units
ASTM C765-97(2015) - Low-Temperature Flexibility of Preformed Tape Sealants
ASTM C76M-15 - Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM C76M-15 - Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
ASTM C779/C779M-12 - Abrasion Resistance of Horizontal Concrete Surfaces
ASTM C78/C78M-15a - Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
ASTM C780-15 - Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
ASTM C782-13 - Softness of Preformed Tape Sealants
ASTM C786/C786M-10 - Fineness of Hydraulic Cement and Raw Materials by the 300-ìm (No. 50), 150-ìm (No. 100), and 75-ìm (No. 200) Sieves by Wet Methods
ASTM C792-15 - Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM C793-05(2010) - Effects of Accelerated Weathering on Elastomeric Joint Sealants
ASTM C794-15a - Adhesion-in-Peel of Elastomeric Joint Sealants
ASTM C795-08(2013) - Thermal Insulation for Use in Contact with Austenitic Stainless Steel
ASTM C796/C796M-12 - Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
ASTM C802-09a - Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
ASTM C805/C805-13a - Rebound Number of Hardened Concrete
ASTM C806-12 - Restrained Expansion of Expansive Cement Mortar
ASTM C807-13 - Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
ASTM C822-11 - Standard Terminology Relating to Concrete Pipe and Related Products
ASTM C823/C823M-12 - Examination and Sampling of Hardened Concrete in Constructions
ASTM C825-06(2011) - Precast Concrete Barriers
ASTM C827/C827M-10 - Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
ASTM C828-11 - Low-Pressure Air Test of Vitrified Clay Pipe Lines
ASTM C834-14 - Latex Sealants
ASTM C836/C836M-15 - High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
ASTM C845/C845M-12 - Expansive Hydraulic Cement
ASTM C857-14 - Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
ASTM C858-10e1 - Underground Precast Concrete Utility Structures
ASTM C869/C869M-11 - Foaming Agents Used in Making Preformed Foam for Cellular Concrete
ASTM C87/C87M-10 - Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
ASTM C87-03 - Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
ASTM C873/C873M-10a - Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
ASTM C876-09 - Half-Cell Potentials of Uncoated Reinforcing Steel in Concrete
ASTM C877M-08 - External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
ASTM C881/C881M-14 - Epoxy-Resin-Base Bonding Systems for Concrete
ASTM C88-13 - Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
ASTM C882 - Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM C882/C882M-13a - Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
ASTM C887-13 - Packaged, Dry, Combined Materials for Surface Bonding Mortar
ASTM C890-13 - Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
ASTM C891-11 - Installation of Underground Precast Concrete Utility Structures
ASTM C896-04(2009) - Standard Terminology Relating to Clay Products
ASTM C900-15 - Pullout Strength of Hardened Concrete
ASTM C90-14 - Loadbearing Concrete Masonry Units
ASTM C902 - Pedestrian and Light Traffic Paving Brick
ASTM C904-01(2012) - Chemical-Resistant Nonmetallic Materials
ASTM C907-03(2012) - Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
ASTM C91/C91M-12 - Masonry Cement
ASTM C913-08 - Precast Concrete Water and Wastewater Structures
ASTM C915-79(2010) - Precast Reinforced Concrete Crib Wall Members
ASTM C918/C918M-13 - Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
ASTM C920-14a - Elastomeric Joint Sealants
ASTM C923M-07 - Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
ASTM C923M-08b - Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
ASTM C928/C928M-13 - Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
ASTM C936/C936M-15 - Solid Concrete Interlocking Paving Units
ASTM C939-10 - Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
ASTM C94/C94M-15a - Ready-Mixed Concrete
ASTM C942-10 - Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
ASTM C944/C944M-99(2005)e1 - Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
ASTM C952-12 - Bond Strength of Mortar to Masonry Units
ASTM C957/C957M-15 - High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
ASTM C969M-02(2009) - Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
ASTM C977-10 - Quicklime and Hydrated Lime for Soil Stabilization
ASTM C979/C979M-10 - Pigments for Integrally Colored Concrete
ASTM C981-05(2013) - Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
ASTM C985M-15a - Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
ASTM C989/C989M-14 - Slag Cement for Use in Concrete and Mortars
ASTM C990-08 - Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
ASTM C990M-09 - Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
ASTM D1000-10 - Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
ASTM D1002-10 - Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1003-11e1 - Haze and Luminous Transmittance of Transparent Plastics
ASTM D1005-95(2013) - Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers
ASTM D1042-12 - Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture
ASTM D1043-10 - Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1044-08e1 - Resistance of Transparent Plastics to Surface Abrasion
ASTM D1047-11 - Poly(Vinyl Chloride) Jacket for Wire and Cable
ASTM D1056-07 - Flexible Cellular Materials-Sponge or Expanded Rubber
ASTM D1073-11 - Fine Aggregate for Bituminous Paving Mixtures
ASTM D1074-09 - Compressive Strength of Bituminous Mixtures
ASTM D1075-11 - Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
ASTM D1084-08 - Viscosity of Adhesives
ASTM D1125-95(2009) - Electrical Conductivity and Resistivity of Water
ASTM D113-07 - Ductility of Bituminous Materials
ASTM D1139/D1139M-15 - Aggregate for Single or Multiple Bituminous Surface Treatments
ASTM D1140-14 - Amount of Material in Soils Finer Than 75-µm (No. 200) Sieve in Soils by Washing
ASTM D1141-98(2008) - Preparation of Substitute Ocean Water
ASTM D1143/D1143M-07e1 - Deep Foundations Under Static Axial Compressive Load
ASTM D1148-13 - Rubber Deterioration—Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
ASTM D1149-07(2012) - Rubber Deterioration-Surface Ozone Cracking in a Chamber
ASTM D1160-06 - Distillation of Petroleum Products at Reduced Pressure
ASTM D1171-99(2007) - Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)
ASTM D1188-07(2015) - Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
ASTM D1204-08 - Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
ASTM D1210-05(2010) - Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage
ASTM D1212-91(2013) - Measurement of Wet Film Thickness of Organic Coatings
ASTM D1214-10(2015)e1 - Sieve Analysis of Glass Spheres
ASTM D1227-13 - Emulsified Asphalt Used as a Protective Coating for Roofing
ASTM D123-15 - Standard Terminology Relating to Textiles
ASTM D1238-10 - Flow Rates of Thermoplastics by Extrusion Plastometer
ASTM D1248-12 - Polyethylene Plastics Extrusion Materials For Wire and Cable
ASTM D1252-06 - Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water
ASTM D127-08 - Drop Melting Point of Petroleum Wax, Including Petrolatum
ASTM D1293-12 - pH of Water
ASTM D1298-99(2005) - Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D130-10 - Corrosiveness to Copper from Petroleum Products by Copper Strip Test
ASTM D1308-02(2013) - Effect of Household Chemicals on Clear and Pigmented Organic Finishes
ASTM D1309-93(2015) - Settling Properties of Traffic Paints During Storage
ASTM D1310-01 - Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D1310-14 - Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D1327-04(2012)e1 - Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
ASTM D1330-04(2015)e1 - Rubber Sheet Gaskets
ASTM D1353-09 - Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ASTM D1388-08(2012) - Stiffness of Fabrics
ASTM D139-12 - Float Test for Bituminous Materials
ASTM D1394-76(2009) - Chemical Analysis of White Titanium Pigments
ASTM D140/D140M-09 - Sampling Bituminous Materials
ASTM D140/D140M-15 - Sampling Bituminous Materials
ASTM D1415-06(2012) - Rubber Property-International Hardness
ASTM D1429-08 - Specific Gravity of Water and Brine
ASTM D1458-13 - Fully Cured Silicone Rubber-Coated Glass Fabric and Tapes for Electrical Insulation
ASTM D146-04(2012)e1 - Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
ASTM D1474/D1474M-13 - Indentation Hardness of Organic Coatings
ASTM D1475-13 - Density of Liquid Coatings, Inks, and Related Products
ASTM D149-09(2013) - Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating
ASTM D1500-07 - ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D150-11 - AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
ASTM D1505-10 - Density of Plastics by the Density-Gradient Technique
ASTM D1510-12 - Carbon Black—Iodine Adsorption Number
ASTM D1525-09 - Vicat Softening Temperature of Plastics
ASTM D1531-06 - Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures
ASTM D1556/D1556M-15 - Density and Unit Weight of Soil in Place by Sand-Cone Method
ASTM D1557-15 - Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000ft-lbf/ft3 (2,700 kN-m/m3))
ASTM D1558-10 - Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
ASTM D1566-11 - Standard Terminology Relating to Rubber
ASTM D1598-02(2009) - Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
ASTM D1599-14e1 - Resistance to Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings
ASTM D1600-08 - Standard Terminology for Abbreviated Terms Relating to Plastics
ASTM D1603-12 - Carbon Black Content In Olefin Plastics
ASTM D16-12 - Paint, Related Coatings, Materials, and Applications
ASTM D1621-10 - Compressive Properties Of Rigid Cellular Plastics
ASTM D1622/D1622M-14 - Apparent Density of Rigid Cellular Plastics
ASTM D1635/D1635M-12 - Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
ASTM D1640/D1640M-14 - Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
ASTM D1644-01(2012) - Nonvolatile Content of Varnishes
ASTM D1652-11e1 - Epoxy Content of Epoxy Resins
ASTM D1653-13 - Water Vapor Transmission of Organic Coating Films
ASTM D1654-08 - Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D1655-13a - Aviation Turbine Fuels
ASTM D1670/D1670M-11 - Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
ASTM D1693-12 - Environmental Stress-Cracking of Ethylene Plastics
ASTM D1709-15 - Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1729-96(2009) - Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D173/D173M-03(2011)e1 - Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
ASTM D1751 - Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
ASTM D1752-04a(2013) - Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction
ASTM D1754/D1754M-09 - Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
ASTM D1755-15 - Poly(Vinyl Chloride) Resins
ASTM D1763-00(2013) - Epoxy Resins
ASTM D1776-08e1 - Conditioning and Testing Textiles
ASTM D1777-96(2015) - Thickness of Textile Materials
ASTM D1784-08 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
ASTM D1785-15 - Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
ASTM D1790-14 - Brittleness Temperature of Plastic Sheeting by Impact
ASTM D1795-96(2007)e1 - Intrinsic Viscosity of Cellulose
ASTM D1822-06 - Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
ASTM D1849-95(2008) - Package Stability of Paint
ASTM D185-07 - Coarse Particles in Pigments, Pastes, and Paints
ASTM D1869-15 - Rubber Rings for Fiber-Reinforced Cement Pipe
ASTM D1875-03(2008)e1 - Density of Adhesives in Fluid Form
ASTM D1876-08 - Peel Resistance of Adhesives (T Peel Test)
ASTM D1883-14 - CBR (California Bearing Ratio) of Laboratory-Compacted Soils
ASTM D1894-08 - Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
ASTM D1929-12 - Determining Ignition Temperature of Plastics
ASTM D1970/D1970-14 - Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
ASTM D1987-07(2012) - Biological Clogging of Geotextile or Soil/Geotextile Filters
ASTM D2000-12 - Rubber Products in Automotive Applications
ASTM D2007-11 - Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method
ASTM D2026/D2026M-15 - Cutback Asphalt (Slow-Curing Type)
ASTM D2027/D2027M-13 - Cutback Asphalt (Medium-Curing Type)
ASTM D2028/D2028M-15 - Cutback Asphalt (Rapid-Curing Type)
ASTM D2041/D2041M-11 - Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
ASTM D2042-09 - Solubility of Asphalt Materials in Trichloroethylene
ASTM D2074-07 - Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method
ASTM D2093-03(2011) - Preparation of Surfaces of Plastics Prior to Adhesive Bonding
ASTM D2103-15 - Polyethylene Film and Sheeting
ASTM D2105-01(2014) - Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
ASTM D2122-15 - Determining Dimensions of Thermoplastic Pipe and Fittings
ASTM D2126-09 - Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D2137-11 - Rubber PropertyBrittleness Point of Flexible Polymers and Coated Fabrics
ASTM D2143-15 - Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
ASTM D2152-13 - Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
ASTM D2166/D2166M-13 - Unconfined Compressive Strength of Cohesive Soil
ASTM D2167-08 - Density and Unit Weight of Soil in Place by the Rubber Balloon Method
ASTM D2170/D2170M-10 - Kinematic Viscosity of Asphalts (Bitumens)
ASTM D2171/D2171M-10 - Viscosity of Asphalts by Vacuum Capillary Viscometer
ASTM D2172/D2172M-11 - Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
ASTM D2178/D2178M-14 - Asphalt Glass Felt Used in Roofing and Waterproofing
ASTM D2197-13 - Adhesion of Organic Coatings by Scrape Adhesion
ASTM D2200-13 - Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces
ASTM D2202-00(2014) - Slump of Sealants
ASTM D2205-85(2010) - Selection of Tests for Traffic Paints
ASTM D2227-96(2011) - Natural Rubber (NR) Technical Grades
ASTM D2235-04(2011) - Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
ASTM D2239-12a - Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
ASTM D2240-05(2010) - Rubber Property-Durometer Hardness
ASTM D2241-05 - Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
ASTM D2243-95(2014) - Freeze-Thaw Resistance of Water-Borne Coatings
ASTM D2244-11 - Calculation of Color Differences From Instrumentally Measured Color Coordinates
ASTM D2247-11 - Testing Water Resistance of Coatings in 100% Relative Humidity
ASTM D2248-01a(2007) - Detergent Resistance of Organic Finishes
ASTM D2256/D2256M-10e1 - Tensile Properties of Yarns by the Single-Strand Method
ASTM D226/D226M-09 - Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
ASTM D227/D227M-03(2011)e1 - Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
ASTM D2274-10 - Oxidation Stability of Distillate Fuel Oil (Accelerated Method)
ASTM D2290-12 - Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D229-09b - Rigid Sheet and Plate Materials Used for Electrical Insulation
ASTM D2301-10 - Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D2308-07(2003) - Thermoplastic Polyethylene Jacket for Electrical Wire and Cable
ASTM D2321-14e1 - Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D2344/D2344M-00(2006) - Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
ASTM D2369-10(2015)e1 - Volatile Content of Coatings
ASTM D2370-98(2010) - Tensile Properties of Organic Coatings
ASTM D2371-85(2010) - Pigment Content of Solvent-Reducible Paints
ASTM D2392-96(2011) - Color Of Dyed Aviation Gasolines
ASTM D2397/D2397M-13 - Cationic Emulsified Asphalt
ASTM D2412-11 - Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
ASTM D2415-98(2008) - Ash in Coal Tar and Pitch
ASTM D2419-02 - Sand Equivalent Value of Soils and Fine Aggregates
ASTM D242/D242M-09 (2014) - Mineral Filler For Bituminous Paving Mixtures
ASTM D243/D243M-14 - Residue of Specified Penetration
ASTM D2434-68(2006) - Permeability of Granular Soils (Constant Head)
ASTM D244-04 - Emulsified Asphalts
ASTM D244-09 - Emulsified Asphalts (Viscosity, Sieve Test, Particle Charge Test, Cement Mixing Test, 5-day Settlement Test, Residue)
ASTM D2444-99(2010) - Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM D2457-13 - Specular Gloss of Plastic Films and Solid Plastics
ASTM D2464-15 - Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM D2466-15 - Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
ASTM D2467-15 - Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
ASTM D2485-91(2013) - Evaluating Coatings For High Temperature Service
ASTM D2486-06(2012)e1 - Scrub Resistance of Wall Paints
ASTM D2487-11 - Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System)
ASTM D2488-09a - Description and Identification of Soils (Visual-Manual Procedure)
ASTM D25-12 - Round Timber Piles
ASTM D2513-13 - Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D256-10 - Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D2563-08 - Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
ASTM D2564-12 - Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
ASTM D2565-99(2008) - Xenon Arc Exposure of Plastics Intended for Outdoor Applications
ASTM D257-14 - DC Resistance or Conductance of Insulating Materials
ASTM D2574-06(2012) - Resistance of Emulsion Paints in the Container to Attack by Microorganisms
ASTM D2583-07 - Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
ASTM D2584-11 - Ignition Loss of Cured Reinforced Resins
ASTM D2609-15 - Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
ASTM D2621-87(2011) - Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
ASTM D2624-09 - Electrical Conductivity of Aviation and Distillate Fuels
ASTM D2628-91(2011) - Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
ASTM D2643/D2643M-08(2013)e1 - Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
ASTM D2657-07 - Heat Fusion Joining of Polyolefin Pipe and Fittings
ASTM D2665-14 - Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
ASTM D2671-13 - Heat-Shrinkable Tubing for Electrical Use
ASTM D2672-14 - Joints for IPS PVC Pipe Using Solvent Cement
ASTM D2680-01(2014) - Acrylonitrile-Butadiene-Styrene (ABS) and Poly (Vinyl Chloride) (PVC) Composite Sewer Piping
ASTM D2683-14 - Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
ASTM D2697-03(2008) - Volume Nonvolatile Matter in Clear or Pigmented Coatings
ASTM D2709-96(2011)e1 - Water and Sediment in Middle Distillate Fuels by Centrifuge
ASTM D2726/D2726M-14 - Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
ASTM D2729-11 - Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM D2734-09 - Void Content of Reinforced Plastics
ASTM D2737-12a - Polyethylene (PE) Plastic Tubing
ASTM D2749-02(2008) - Standard Symbols for Dimensions of Plastic Pipe Fittings
ASTM D2754-10 - High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
ASTM D276-12 - Identification of Fibers in Textiles
ASTM D2765-11 - Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
ASTM D2774-12 - Underground Installation of Thermoplastic Pressure Piping
ASTM D2792-69(2015) - Solvent and Fuel Resistance of Traffic Paint
ASTM D2794-93(2010) - Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
ASTM D2805-96a(2003) - Hiding Power of Paints by Reflectometry
ASTM D2834-95(2008) - Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion
ASTM D2835-89(2012) - Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
ASTM D2837-13e1 - Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials
ASTM D2839-10 - Melt Index Strand for Determining Density of Polyethylene
ASTM D2842-12 - Water Absorption of Rigid Cellular Plastics
ASTM D2843-10 - Density of Smoke from the Burning or Decomposition of Plastics
ASTM D2846/D2846M-09be1 - Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
ASTM D2850-03a(2007) - Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
ASTM D2855-96(2010) - Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
ASTM D2859-06(2011) - Ignition Characteristics of Finished Textile Floor Covering Materials
ASTM D2863-12 - Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
ASTM D2872-12e1 - Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
ASTM D2919-01(2014) - Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D2940/D2940M - Graded Aggregate Material For Bases or Subbases for Highways or Airports
ASTM D2940/D2940M-09 - Graded Aggregate Material For Bases or Subbases for Highways or Airports
ASTM D2950/D2950M-14 - Density of Bituminous Concrete in Place by Nuclear Methods
ASTM D2990-09 - Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
ASTM D2992-12 - Obtaining Hydrostatic or Pressure Design Basis for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
ASTM D2995-99(2009) - Estimating Application Rate of Bituminous Distributors
ASTM D2996-15 - Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
ASTM D3005-10 - Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3006-10 - Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
ASTM D3034-14a - Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
ASTM D3035-15 - Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
ASTM D3039/D3039M-14 - Tensile Properties of Polymer Matrix Composite Materials
ASTM D3045-92(2010) - Heat Aging of Plastics Without Load
ASTM D3080/D3080M-11 - Direct Shear Test of Soils Under Consolidated Drained Conditions
ASTM D3137-81(2007) - Rubber Property—Hydrolytic Stability
ASTM D3139 (R2005) - Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
ASTM D3139-98(2011) - Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
ASTM D3143/D3143M-13 - Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
ASTM D3155-11 - Lime Content of Uncured Soil-Lime Mixtures
ASTM D3161/D3161M-12 - Wind-Resistance of Asphalt Shingles (Fan-Induced Method)
ASTM D3163-01(2014) - Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D3168-85(2011) - Qualitative Identification of Polymers in Emulsion Paints
ASTM D3171-11 - Constituent Content of Composite Materials
ASTM D3184-11 - Rubber—Evaluation of NR (Natural Rubber)
ASTM D3203/D3203M-11 - Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
ASTM D3212-07(2013) - Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
ASTM D3218-07(2012) - Polyolefin Monofilaments
ASTM D3261-12e1 - Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
ASTM D3262-11 - “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
ASTM D3271-87(2012) - Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis
ASTM D3273-12 - Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
ASTM D3274-09e1 - Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soil and Dirt Accumulation
ASTM D3278-96(2011) - Flash Point of Liquids by Small Scale Closed-Cup Apparatus
ASTM D3282-09 - Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
ASTM D3299-10 - Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D3330/D3330M-04(2010) - Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D3335-85a(2009) - Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy
ASTM D3350-14 - Polyethylene Plastics Pipe and Fittings Materials
ASTM D3359-09e2 - Measuring Adhesion by Tape Test
ASTM D3363-05(2011)e2 - Film Hardness by Pencil Test
ASTM D3381/D3381M-13 - Viscosity-Graded Asphalt Cement for Use in Pavement Construction
ASTM D3410/D3410M-03(2008) - Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
ASTM D3418-08 - Transition Temperatures of Polymers By Differential Scanning Calorimetry
ASTM D344-11 - Relative Hiding Power of Paints by the Visual Evaluation of Brushouts
ASTM D345-02(2010) - Sampling and Testing Calcium Chloride for Roads and Structural Applications
ASTM D3451-06(2012) - Testing Coating Powders and Powder Coatings
ASTM D3517-14 - Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
ASTM D3535-07a - Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
ASTM D3542-08(2013) - Preformed Polychloroprene Elastomeric Joint Seals for Bridges
ASTM D3549/D3549M-11 - Thickness or Height of Compacted Bituminous Paving Mixture Specimens
ASTM D3552-12 - Tensile Properties of Fiber Reinforced Metal Matrix Composites
ASTM D3574-11 - Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
ASTM D3575-08 - Flexible Cellular Materials Made From Olefin Polymers (Property tests - density, compressive strength, compression set, tensile strength, elongation at break, tear strength)
ASTM D36/D36M-14e1 - Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM D3618-05(2015) - Detection of Lead in Paint and Dried Paint Films
ASTM D3628-08 - Selection and Use of Emulsified Asphalts
ASTM D3665-07e1 - Random Sampling of Construction Materials
ASTM D3665-12 - Random Sampling of Construction Materials
ASTM D3666-11 - Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
ASTM D3678-14 - Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
ASTM D3679-11 - Rigid Poly(Vinyl Chloride) (PVC) Siding
ASTM D3681-12e1 - Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition
ASTM D3689-07 - Deep Foundations Under Static Axial Tensile Load
ASTM D3718-85a(2010) - Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
ASTM D3723-05(2011) - Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing
ASTM D3744/D3744M-11a - Aggregate Durability Index
ASTM D3747-79(2007) - Emulsified Asphalt Adhesive for Adhering Roof Insulation
ASTM D3754-14 - “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
ASTM D3759/D3759M-05(2011) - Breaking Strength and Elongation of Pressure-Sensitive Tape
ASTM D3767-03(2008) - Rubber—Measurement of Dimensions
ASTM D3773/D3773M-10 - Length of Woven Fabric
ASTM D3775-08 - Fabric Count of Woven Fabric
ASTM D3776 / D3776M-09ae2 - Mass Per Unit Area (Weight) of Fabric
ASTM D3786/D3786M-13 - Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
ASTM D3828-09 - Flash Point by Small Scale Closed Cup Tester
ASTM D3839-14 - Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
ASTM D3841-97(2008)e1 - Glass-Fiber-Reinforced Polyester Plastic Panels
ASTM D3884-09(2013)e1 - Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
ASTM D3895-07 - Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D3910-15 - Design, Testing, and Construction of Slurry Seal
ASTM D3914-02(2008) - In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM D3916-08 - Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM D3917-15a - Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
ASTM D3931-08(2015) - Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
ASTM D395-03(2008) - Rubber Property-Compression Set
ASTM D3960-05(2013) - Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM D3963/D3963M-93 - Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
ASTM D3965-11 - Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
ASTM D3966-07 - Deep Foundations Under Lateral Load
ASTM D3977-97(2013)e1 - Determining Sediment Concentration in Water Samples
ASTM D3999-11 - Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM D4000-12 - Standard Classification System for Specifying Plastic Materials
ASTM D4014-03(2012) - Plain and Steel-Laminated Elastomeric Bearings for Bridges
ASTM D4017-02(2008)e1 - Water in Paints and Paint Materials by Karl Fischer Method
ASTM D402/D402M - Distillation of Cutback Asphalt
ASTM D402-14 - Distillation of Cut-Back Asphaltic (Bituminous) Products
ASTM D4052-11 - Density and Relative Density of Liquids by Digital Density Meter
ASTM D4060-14 - Abrasion Resistance of Organic Coatings by the Taber Abraser
ASTM D4061-94(2006) - Retroreflectance of Horizontal Coatings
ASTM D4065-06 - Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
ASTM D4066-01a(2008) - Standard Classification System for Nylon Injection and Extrusion Materials (PA)
ASTM D4070-15 - Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
ASTM D4097-01(2010) - Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
ASTM D41/D41M-11 - Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
ASTM D4101-14 - Polypropylene Injection and Extrusion Materials
ASTM D412-06ae2(2013) - Vulcanized Rubber and Thermoplastic Elastomers—Tension
ASTM D4125/D4125M-10 - Asphalt Content of Bituminous Mixtures by the Nuclear Method
ASTM D413-98(2007) - Rubber Property - Adhesion to Flexible Substrate
ASTM D4142-89(2009) - Testing Epoxy Resins
ASTM D4145-10 - Coating Flexibility of Prepainted Sheet
ASTM D4161-14 - “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
ASTM D4214-07(2015) - Evaluating the Degree of Chalking of Exterior Paint Films
ASTM D4215-07(2013) - Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
ASTM D4218-96(2008) - Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
ASTM D4219-08 - Unconfined Compressive Strength Index of Chemical-Grouted Soils
ASTM D4226-11 - Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
ASTM D422-63(2007)e1 - Particle-Size Analysis of Soils
ASTM D4258-05(2012) - Standard Practice for Surface Cleaning Concrete for Coating
ASTM D4263-83(2012) - Indicating Moisture in Concrete by the Plastic Sheet Method
ASTM D4280-15 - Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
ASTM D4285-83(R2006) - Indicating Oil or Water in Compressed Air
ASTM D429-08 - Rubber Property-Adhesion to Rigid Substrates
ASTM D43-00(2012)e1 - Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
ASTM D4317-98(2011) - Polyvinyl Acetate-Based Emulsion Adhesives
ASTM D4318-10e1 - Liquid Limit, Plastic Limit, and Plasticity Index of Soils
ASTM D4354-12 - Sampling of Geosynthetics for Testing
ASTM D4355/D4355M-14 - Deterioration of Geotextiles from Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
ASTM D4355-07 - Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
ASTM D4380-12 - Density of Bentonitic Slurries
ASTM D4383-12 - Plowable, Raised Retroreflective Pavement Markers
ASTM D4385-13 - Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
ASTM D4389/D4389M-04(2010)e1 - Finished Glass Fabrics Woven From Rovings
ASTM D4397-10 - Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
ASTM D4400-99(2012)e1 - Sag Resistance of Paints Using a Multinotch Applicator
ASTM D4402/D4402M-15 - Viscosity Determinations of Unfilled Asphalts Using the Brookfield Thermosel Apparatus
ASTM D4417-14 - Field Measurement of Surface Profile of Blast Cleaned Steel
ASTM D4434 / D4434M-12 - Poly(Vinyl Chloride) Sheet Roofing
ASTM D4435-13e1 - Rock Bolt Anchor Pull Test
ASTM D4439-15 - Standard Terminology for Geosynthetics
ASTM D4451-02(2008) - Pigment Content of Paints by Low-Temperature Ashing
ASTM D445-12 - Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
ASTM D4475-02(2008) - Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method
ASTM D4476/D4476M-14 - Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
ASTM D4479 / D4479M-07(2012)e1 - Asphalt Roof Coatings—Asbestos-Free
ASTM D448-12 - Sizes of Aggregate for Road and Bridge Construction
ASTM D449-03(2014)e1 - Asphalt Used in Dampproofing and Waterproofing
ASTM D4491/D4491M-15 - Water Permeability of Geotextiles by Permittivity
ASTM D450-12 - Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
ASTM D4505-12 - Preformed Plastic Pavement Marking Tape for Extended Service Life
ASTM D4508-10 - Chip Impact Strength of Plastics
ASTM D4530-11 - Determination of Carbon Residue (Micro Method)
ASTM D4533-11 - Trapezoid Tearing Strength of Geotextiles
ASTM D4541-09e1 - Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D4580/D4580M-12 - Measuring Delaminations in Concrete Bridge Decks by Sounding
ASTM D4585/D4585M-13 - Testing Water Resistance of Coatings Using Controlled Condensation
ASTM D4586-07(2012)e1 - Asphalt Roof Cement, Asbestos-Free
ASTM D4587-11 - Fluorescent UV-Condensation Exposures of Paint and Related Coatings
ASTM D4592-12 - Preformed Plastic Pavement Marking Tape for Limited Service Life
ASTM D4594-96(2015)e1 - Effects of Temperature on Stability of Geotextiles
ASTM D4595-11 - Tensile Properties of Geotextiles by the Wide-Width Strip Method
ASTM D4632/D4632M-15a - Grab Breaking Load and Elongation of Geotextiles
ASTM D4643-08 - Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
ASTM D4707-09 - Measuring Paint Spatter Resistance to Roller Application
ASTM D4708-12 - Preparation of Uniform Free Films of Organic Coatings
ASTM D471-12 - Rubber Property-Effect of Liquids
ASTM D4716/D4716M-14 - Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM D4719-07 - Prebored Pressuremeter Testing in Soils
ASTM D4737-10 - Calculated Cetane Index by Four Variable Equation
ASTM D4751-12 - Determining Apparent Opening Size of a Geotextile
ASTM D4759-11 - Determining the Specification Conformance of Geosynthetics
ASTM D4761-13 - Mechanical Properties of Lumber and Wood-Base Structural Material
ASTM D4762-11a - Testing Polymer Matrix Composite Materials
ASTM D4767-11 - Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D4788-03(2013) - Detecting Delaminations in Bridge Decks Using Infrared Thermography
ASTM D4791-01 - Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4791-10 - Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
ASTM D4792/D4792M-13 - Potential Expansion of Aggregates from Hydration Reactions
ASTM D4796-10 - Bond Strength of Thermoplastic Traffic Marking Materials
ASTM D4797-12a - Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
ASTM D4812-11 - Unnotched Cantilever Beam Impact Strength of Plastics
ASTM D482-07 - Ash from Petroleum Products
ASTM D4829-11 - Expansion Index of Soils
ASTM D4832-10 - Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
ASTM D4833/D4833M-07(2013)e1 - Index Puncture Resistance of Geotextiles, Geomembranes, and Related Products
ASTM D4866/D4866M-88(2011)e1 - Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures
ASTM D4867/D4867M-09(2014) - Effect of Moisture on Asphalt Concrete Paving Mixtures
ASTM D4873-15 - Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls
ASTM D4884/D4884M-14a - Strength of Sewn or Thermally Bonded Seams of Geotextiles
ASTM D4885-01(2011) - Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
ASTM D4886-10 - Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
ASTM D4894-07(2012) (Replaces D1457) - Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
ASTM D4895-10 (Replaces D1457) - Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
ASTM D4940-10 - Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
ASTM D4956-13 - Retroreflective Sheeting for Traffic Control
ASTM D4960-08(2013) - Evaluation of Color for Thermoplastic Traffic Marking Materials
ASTM D4972-13 - pH of Soils
ASTM D4976-12 - Polyethylene Plastics Molding and Extrusion Materials
ASTM D4990-97a(2005)e1 - Coal Tar Glass Felt Used in Roofing and Waterproofing
ASTM D4992-14e1 - Standard Practice for Evaluation of Rock to be Used for Erosion Control
ASTM D5/D5M-13 - Penetration of Bituminous Materials
ASTM D5028-09 - Curing Properties of Pultrusion Resins by Thermal Analysis
ASTM D5034-09 - Breaking Strength and Elongation of Textile Fabrics (Grab Test)
ASTM D5035-11(2015) - Breaking Force and Elongation of Textile Fabrics (Strip Method)
ASTM D5040-90(2011) - Ash Content of Adhesives
ASTM D5064-07(2012) - Conducting a Patch Test to Assess Coating Compatibility
ASTM D5-06e1 - Penetration of Bituminous Materials
ASTM D5078/D5078M-11 - Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
ASTM D5084-10 - Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
ASTM D5095-91(2013) - Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
ASTM D5101-12 - Measuring the Filtration Compatibility of Soil-Geotextile Systems
ASTM D5106-15 - Steel Slag Aggregates for Bituminous Paving Mixtures
ASTM D5112-98(2009) - Vibration (Horizontal Linear Sinusoidal Motion) Test of Products
ASTM D5117-09 - Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
ASTM D5141-11 - Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
ASTM D5147/D5147M-14 - Sampling and Testing Modified Bituminous Sheet Material
ASTM D5167-13 - Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
ASTM D5199-12 - Measuring Nominal Thickness of Geotextiles and Geomembranes
ASTM D520-00(2011) - Zinc Dust Pigment
ASTM D5201-05a(2010) - Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
ASTM D522/D522M-13 - Mandrel Bend Test of Attached Organic Coatings
ASTM D5229/D5229M-14 - Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
ASTM D523-14 - Specular Gloss
ASTM D5249-10 - Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
ASTM D5261-10 - Measuring Mass per Unit Area of Geotextiles
ASTM D5262-07(2012) (supercedes GRI-GG3-90) - Evaluating the Unconfined Tension Creep Behavior of Geosynthetics
ASTM D5268-13 - Topsoil Used for Landscaping Purposes
ASTM D529 (1996) - Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
ASTM D5295/D5295M-14 - Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
ASTM D5321/D5321M-14 - Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
ASTM D5324-10 - Testing Water-Borne Architectural Coatings
ASTM D5329-09 - Sealants and Fillers, Hot-Applied, For Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
ASTM D5334-08 - Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
ASTM D5338-11 - Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions
ASTM D5360-09 - Design and Construction of Bituminous Surface Treatments
ASTM D5363-03(2008) - Anaerobic Single-Component Adhesives (AN)
ASTM D5385/D5385M-93(2014)e1 - Hydrostatic Pressure Resistance of Waterproofing Membranes
ASTM D5397-07(2012) - Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
ASTM D5420-10 - Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D542-14 - Index of Refraction of Transparent Organic Plastics
ASTM D543-06 - Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D545-14 - Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
ASTM D5453-09 - Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
ASTM D546-10 - Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
ASTM D5493-06(2011) - Permittivity of Geotextiles Under Load
ASTM D5494-93(2011) - Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
ASTM D5514/D5514M-14 - Large Scale Hydrostatic Puncture Testing of Geosynthetics
ASTM D5539-13 - Seed Starter Mix
ASTM D5546-09 - Solubility of Asphalt Binders in Toluene by Centrifuge
ASTM D5607-08 - Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
ASTM D5617-04(2015) - Multi-Axial Tension Test for Geosynthetics
ASTM D562-10 - Consistency of Paints Measuring Krebs Unit (KU) Visosity Using a Stormer Viscometer
ASTM D5628-10 - Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5648-01(2014) - Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D5685-11 - “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
ASTM D570-98(2010)e1 - Water Absorption of Plastics
ASTM D573-04(2010) - Rubber-Deterioration in an Air Oven
ASTM D575-91(2012) - Rubber Properties in Compression
ASTM D5798-11 - Fuel Ethanol (Ed75-Ed85) for Automotive Spark-Ignition Engines
ASTM D5801-12 - Toughness and Tenacity of Bituminous Materials
ASTM D5813-04(2012) - Cured-In-Place Thermosetting Resin Sewer Piping Systems
ASTM D5818-11 - Obtaining Samples of Geosynthetics from a Test Section for Assessment of Installation Damage
ASTM D5821-01 (2006) - Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D5821-13 - Determining the Percentage of Fractured Particles in Coarse Aggregate
ASTM D5860-95(2013) - Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
ASTM D5868-01(2014) - Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D5869-07a - Dark Oven Heat Exposure of Roofing and Waterproofing Materials
ASTM D5884-04A(2015)e1 - Determining Tearing Strength of Internally Reinforced Geomembranes
ASTM D5887-09 - Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
ASTM D5890-11 - Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
ASTM D5891-02(2009) - Fluid Loss of Clay Component of Geosynthetic Clay Liners
ASTM D5893/D5893M-10 - Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
ASTM D5894-10 - Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
ASTM D5918-13 - Frost Heave and Thaw Weakening Susceptibility of Soils
ASTM D5926-15 - Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
ASTM D5930-09 - Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
ASTM D5947-06 - Physical Dimensions of Solid Plastics Specimens
ASTM D5970-09 - Deterioration of Geotextiles from Outdoor Exposure
ASTM D5971/D5971M-13 - Sampling Freshly Mixed Controlled Low-Strength Material
ASTM D5973-97(2012) - Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
ASTM D5977-15 - High Load Rotational Spherical Bearings for Bridges and Structures
ASTM D5993-14 - Measuring Mass Per Unit of Geosynthetic Clay Liners
ASTM D5994/D5994M-10(2015)e1 - Measuring Core Thickness of Textured Geomembranes
ASTM D6023-07 - Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
ASTM D6024/MD6024-15 - Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
ASTM D6040-06 - Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
ASTM D605-82(2007) - Magnesium Silicate Pigment (Talc)
ASTM D6070-02(2010) - Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
ASTM D6079-11 - Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
ASTM D6084-06 - Elastic Recovery of Bituminuous Materials by Ductilometer
ASTM D6087 - Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
ASTM D6088-06(2011) - Installation of Geocomposite Pavement Drains
ASTM D609-00(2012) - Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products
ASTM D610-08(2012) - Evaluating Degree of Rusting on Painted Steel Surfaces
ASTM D611-07 - Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
ASTM D6114 / D6114M-09 - Asphalt-Rubber Binder
ASTM D6134-07(2013) - Vulcanized Rubber Sheets Used in Waterproofing Systems
ASTM D6140-00(2014) - Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
ASTM D6153-15 - Materials for Bridge Deck Waterproofing Membrane Systems
ASTM D6155-15 - Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
ASTM D6164/D6164M-11 - Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
ASTM D618-08 - Conditioning Plastics for Testing
ASTM D6213-97(2009) - Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
ASTM D624-00(2012) - Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
ASTM D6241-04 - Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
ASTM D6244-06(2011) - Vertical Compression of Geocomposite Pavement Panel Drains
ASTM D6270-08e1 - Use of Scrap Tires in Civil Engineering Applications
ASTM D6297-13 - Asphaltic Plug Joints for Bridges
ASTM D6307-10 - Asphalt Content of Hot-Mix Asphalt by Ignition Method
ASTM D632-12 (Reinstated 2012) - Sodium Chloride
ASTM D635-10 - Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
ASTM D6372-15 - Design, Testing, and Construction of Micro-Surfacing
ASTM D6373-15 - Performance Graded Asphalt Binder
ASTM D638-14 - Tensile Properties of Plastics
ASTM D6386-10 - Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
ASTM D6390-11 - Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
ASTM D6454-99(2011) - Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
ASTM D6455-11 - Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
ASTM D6459-11 - Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
ASTM D6460-12 - Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
ASTM D6461-99(2007)e2 - Silt Fence Materials
ASTM D6462-03(2008) - Silt Fence Installation
ASTM D648-07 - Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D6489-99(2012) - Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
ASTM D6495/MD6495-15 - Acceptance Testing Requirements for Geosynthetic Clay Liners
ASTM D6497/D6497M-02(2015)e1 - Mechanical Attachment of Geomembrane to Penetrations or Structures
ASTM D6506-01(2009) - Asphalt Based Protection for Below-Grade Waterproofing
ASTM D6524-00(2011) - Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
ASTM D6525/D6525M-14 - Measuring Nominal Thickness of Rolled Erosion Control Products
ASTM D653-11 - Standard Terminology Relating to Soil, Rock, and Contained Fluids
ASTM D6566-14 - Measuring Mass per Unit Area of Turf Reinforcement Mats
ASTM D6567-00(2014) - Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
ASTM D6575-14a - Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRM's)
ASTM D6578/D6578M-13 - Determination of Graffiti Resistance
ASTM D6599-00(2014)e1 - Construction of Live Fascines on Slopes
ASTM D660-93(2011) - Evaluating Degree of Checking of Exterior Paints
ASTM D661-93(2011) - Evaluating Degree of Cracking of Exterior Paints
ASTM D6622-01(2009) - Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
ASTM D6628-03(2010)e1 - Color of Pavement Marking Materials
ASTM D6636-01(2011) - Determination of Ply Adhesion Strength of Reinforced Geomembranes
ASTM D6637-15 - Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
ASTM D6638-11 - Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
ASTM D6648-08 - Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D6662-09 - Polyolefin-Based Plastic Lumber Decking Boards
ASTM D6684-04(2010) - Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
ASTM D668-99(2004) - Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
ASTM D6690-01 - Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
ASTM D6693/D6693M-04(2015e1) - Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
ASTM D6704-08(2015) - Determining the Workability of Asphalt Cold Mix Patching Material
ASTM D6706-01(2013) - Measuring Geosynthetic Pullout Resistance in Soil
ASTM D6707-06(2011) - Circular-Knit Geotextile for Use in Subsurface Drainage Applications
ASTM D6711-15 - Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
ASTM D6752/D6752M-11 - Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6752-03 - Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
ASTM D6757-07 - Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
ASTM D6767-14 - Pore Size Characteristics of Geotextiles by Capillary Flow Test
ASTM D6768-04(2015)e2 - Tensile Strength of Geosynthetic Clay Liners
ASTM D6769/D6769M-02(2010)e1 - Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
ASTM D6783-05(2011) - Polymer Concrete Pipe
ASTM D6797-07(2011) - Bursting Strength of Fabrics Constant-Rate-of-Extension (CRE) Ball Burst Test
ASTM D6816-11 - Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
ASTM D6817/D6817M-15 - Rigid Cellular Polystyrene Geofoam
ASTM D6818-14 - Ultimate Tensile Properties of Turf Reinforcement Mats
ASTM D6837-10 - Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
ASTM D6838-04(2010) - Cummins M11 High Soot Test
ASTM D6884-03(2010) - Installation of Articulating Concrete Block (ACB) Revetment Systems
ASTM D6894-11 - Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
ASTM D6904-03(2007) - Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
ASTM D6916-06c(2011) - Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
ASTM D692/D692M-15 - Coarse Aggregate for Bituminous Paving Mixtures
ASTM D6924-03(2012) - Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
ASTM D6925-15 - Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
ASTM D6926-10 - Preparation of Bituminous Specimens Using Marshall Apparatus
ASTM D6927 - Marshall Stability and Flow of Asphalt Mixtures
ASTM D6928-10 - Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
ASTM D6929-10 - Freezing of Emulsified Asphalts
ASTM D6930-10 - Settlement and Storage Stability of Emulsified Asphalts
ASTM D6931-12 - Indirect Tensile (IDT) Strength of Bituminous Mixtures
ASTM D6932/D6932M-08 - Materials and Construction of Open-Graded Friction Course Plant Mixtures
ASTM D6933-13 - Oversized Particles in Emulsified Asphalts (Sieve Test)
ASTM D6934-08 - Residue by Evaporation of Emulsified Asphalt
ASTM D6935-11 - Determining Cement Mixing of Emulsified Asphalt
ASTM D6936-09 - Determining Demulsibility of Emulsified Asphalt
ASTM D6937-08 - Determining Density of Emulsified Asphalt
ASTM D6938-10 - In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
ASTM D6944-15 - Resistance of Cured Coatings to Thermal Cycling
ASTM D6946/D6946M-13e1 - Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)
ASTM D6947-07(2013) - Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
ASTM D695-15 - Compressive Properties of Rigid Plastics
ASTM D6954-04(2013) - Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
ASTM D696-08e1 - Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C
ASTM D698-12e1 - Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
ASTM D6992-03(2015) - Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
ASTM D6997 - Distillation of Emulsified Asphalt
ASTM D6997-12 - Distillation of Emulsified Asphalt
ASTM D6998-11 - Evaluating Aggregate Coating using Emulsified Asphalts
ASTM D7001-06(2011) - Geocomposites for Pavement Edge Drains and Other High-Flow Applications
ASTM D7003-03(2008) - Strip Tensile Properties of Reinforced Geomembranes
ASTM D7004-03(2013)e1 - Grab Tensile Properties of Reinforced Geomembranes
ASTM D7005/D7005M-15 - Determining the Bond Strength (Ply Adhesion) of Geocomposites
ASTM D7006-03(2013) - Ultrasonic Testing of Geomembranes
ASTM D70-09e1 - Specific Gravity and Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM D7014-10 - Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
ASTM D7032-10a - Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)
ASTM D7056-07(2012) - Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
ASTM D7063/D7063M-11 - Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
ASTM D7064/D7064M-08e1 - Open-Graded Friction Course (OGFC) Mix Design
ASTM D7082-15 - Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
ASTM D7089-06(2014) - Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
ASTM D7091-13 - Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non Ferrous Metals
ASTM D7101-13 - Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
ASTM D711-10(2015) - No-Pick-Up Time of Traffic Paint
ASTM D7113/D7113M-10 - Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
ASTM D713-12 - Conducting Road Service Tests on Fluid Traffic Marking Materials
ASTM D714-02(2009) - Evaluating Degree of Blistering of Paints
ASTM D7158-11 - Wind Resistance of Sealed Asphalt Shingles (Uplift Force/Uplift Resistance Method)
ASTM D7174-05(2011) - Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
ASTM D7175-15 - Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7176-06(2011) - Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
ASTM D7180/D7180M-05(2013)e1 - Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
ASTM D7205/D7205M-06(2011) - Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
ASTM D7208-14 - Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
ASTM D7226-13 - Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
ASTM D7229-08(2013)e1 - Preparation and Determination of Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of Superpave Gyratory Compactor
ASTM D7238-06(2012) - Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
ASTM D7239-13 - Hybrid Geosynthetic Paving Mat for Highway Applications
ASTM D7247-07ae1 - Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
ASTM D7258-14 - Polymeric Piles
ASTM D7273-08(2013)e1 - Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
ASTM D7275-07(2012) - Tensile Properties of Bituminous Geomembranes (BGM)
ASTM D7276-08 - Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
ASTM D7281-07 - Determining Water Migration Resistance Through Roof Membranes
ASTM D7307-06(2011) - Sampling of Thermoplastic Traffic Marking Materials
ASTM D7308-07(2012) - Sample Preparation of Thermoplastic Traffic Marking Materials
ASTM D7312-10 - Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
ASTM D732-10 - Shear Strength of Plastics by Punch Tool
ASTM D7322-13a - Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
ASTM D7336/D7336M-12 - Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
ASTM D7337/D7337M-12 - Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
ASTM D7343-12 - Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
ASTM D7349-11 - Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
ASTM D7351-13 - Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications
ASTM D7357-07(2012) - Cellulose Fibers for Fiber-Reinforced Concrete
ASTM D7367-14 - Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
ASTM D7369-11 - Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
ASTM D7377-09 - Evaluating the Water Wash-Off Resistance of Traffic Paints
ASTM D7378-10 - Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
ASTM D7380-08 - Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
ASTM D7382-08 - Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
ASTM D7396-08 - Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
ASTM D7406-07(2012) - Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
ASTM D7460-10 - Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
ASTM D746-14 - Brittleness Temperature of Plastics and Elastomers by Impact
ASTM D7466/D7466M-10(2015)e1 - Measuring the Asperity Height of Textured Geomembrane
ASTM D747-10 - Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D7498/D7498M-09(2014)e1 - Vertical Strip Drains Using a Large Scale Consolidation Test
ASTM D7508/D7508M-10(2015) - Polyolefin Chopped Strands for Use in Concrete
ASTM D75-09 - Sampling Aggregates
ASTM D7539-10(2015) - Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
ASTM D7556-10 - Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
ASTM D7557/D7557M-09(2013)e1 - Sampling of Expanded Polystyrene Geofoam Specimens
ASTM D7565/D7565M-10 - Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
ASTM D7568-13 - Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications
ASTM D7585/D7585M-10 - Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
ASTM D7613-10 - Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
ASTM D7616/D7616M-11 - Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
ASTM D7617/D7617M-11 - Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
ASTM D7643-10 - Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
ASTM D7693/D7693M-15 - Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks
ASTM D7698-11a - In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
ASTM D7701-11 - Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag
ASTM D7705/D7705M-12 - Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
ASTM D772-86(2011) - Evaluating Degree of Flaking (Scaling) of Exterior Paints
ASTM D7735-11e1 - Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
ASTM D7744/D7744M-11 - Tensile Testing of High Performance Polyethylene Tapes
ASTM D7748/D7748M-14 - Flexural Rigidity of Geogrids, Geotextiles and Related Products
ASTM D7762-11 - Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
ASTM D7792/D7792M-15 - Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
ASTM D7803-12 - Standard Practice for Preparation of Zinc (Hot Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
ASTM D784-08 - Orange Shellac and Other Indian Lacs for Electrical Insulation
ASTM D785-08 - Rockwell Hardness of Plastics and Electrical Insulating Materials
ASTM D7853-13 - Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete
ASTM D790-10 - Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D7906-14 - Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator
ASTM D7913/D7913M-14 - Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
ASTM D7914/D7914M-14 - Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
ASTM D792-08 - Density and Specific Gravity (Relative Density) of Plastics by Displacement
ASTM D7942-15 - Thermoplastic Pavement Markings in Non Snow Plow Areas
ASTM D7986-15 - Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
ASTM D7992/D7992M-15 - Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs
ASTM D8008 - Standard Practice for Representative Field Sampling of Traffic Paints
ASTM D803-15 - Testing Tall Oil
ASTM D806-11 - Cement Content of Hardened Soil-Cement Mixtures
ASTM D8-13b - Standard Terminology Relating to Materials for Roads and Pavements
ASTM D822-01(2006) - Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D832-07 - Rubber Conditioning For Low Temperature Testing
ASTM D854-10 - Specific Gravity of Soil Solids by Water Pycnometer
ASTM D86-11b - Distillation of Petroleum Products at Atmospheric Pressure
ASTM D868-10(2015) - Determination of Degree of Bleeding of Traffic Paint
ASTM D869-85(2011) - Evaluating Degree of Settling of Paint
ASTM D870-15 - Testing Water Resistance of Coatings Using Water Immersion
ASTM D876-09 - Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
ASTM D882-10 - Tensile Properties of Thin Plastic Sheeting
ASTM D883-11 - Standard Terminology Relating to Plastics
ASTM D891-09 - Specific Gravity, Apparent, of Liquid Industrial Chemicals
ASTM D903-98(2010) - Peel or Stripping Strength of Adhesive Bonds
ASTM D913-10 - Evaluating Degree of Traffic Paint Line Wear
ASTM D92-12 - Flash and Fire Points by Cleveland Open Cup
ASTM D926-08 - Rubber Property—Plasticity and Recovery (Parallel Plate Method)
ASTM D937-07 - Cone Penetration of Petrolatum
ASTM D946-09a - Penetration-Graded Asphalt Cement for Use in Pavement Construction
ASTM D95-05(2010) - Water in Petroleum Products and Bituminous Materials by Distillation
ASTM D953-10 - Bearing Strength of Plastics
ASTM D955-08 - Measuring Shrinkage from Mold Dimensions of Thermoplastics
ASTM D962-81(2008)e1 - Aluminum Powder and Paste Pigments for Paints
ASTM D968-05(2010) - Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM D969-85(2003)e1 - Laboratory Determination of Degree of Bleeding of Traffic Paint
ASTM D97-11 - Pour Point of Petroleum Products
ASTM D977-13e1 - Emulsified Asphalt
ASTM D98-15 - Calcium Chloride
ASTM D994/D994M-11 - Preformed Expansion Joint Filler for Concrete (Bituminous Type)
ASTM E10-15 - Brinell Hardness of Metallic Materials
ASTM E104-02(2007) - Maintaining Constant Relative Humidity by Means of Aqueous Solutions
ASTM E108-11 - Fire Tests of Roof Coverings
ASTM E11-09e1 - Wire Cloth and Sieves for Testing
ASTM E1131-08 - Compositional Analysis by Thermogravimetry
ASTM E1132-06 - Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
ASTM E1142-11b - Standard Terminology Relating to Thermophysical Properties
ASTM E1164-12 - Obtaining Spectrophotometric Data for Object-Color Evaluation
ASTM E119-12 - Fire Tests of Building Construction and Materials
ASTM E1247-03 - Identifying Fluorescence in Object-Color Specimens by Spectrophotometry
ASTM E1252-98(2007) - General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E1260-03(2009) - Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
ASTM E1274-03(2012) - Measuring Pavement Roughness Using a Profilograph
ASTM E1318-09 - Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods
ASTM E1332-10a - Determination of Outdoor-Indoor Transmission Class
ASTM E1337-90(2012) - Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
ASTM E1347-06(2011) (Replaces E97) - Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
ASTM E1349-06 - Reflectance Factor and Color by Spectrophotometry Using Bidirectional Geometry
ASTM E1356-08 - Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
ASTM E136-12 - Behavior of Materials in a Vertical Tube Furnace at 750°C
ASTM E1512-01(2007) - Testing Bond Performance of Adhesive-Bonded Anchors
ASTM E154-08a(2013)e1 - Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
ASTM E155-10 - Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings
ASTM E162-12a - Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E1640-13 - Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
ASTM E1642-00(2010) - General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
ASTM E1643-11 - Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
ASTM E1686-10 - Selection of Environmental Noise Measurements and Criteria
ASTM E1703/E1703M-10 - Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
ASTM E1709-09 - Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
ASTM E1710-11 - Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
ASTM E171-11 - Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
ASTM E1745-11 - Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
ASTM E177-10 - Use of the Terms Precision and Bias in ASTM Test Methods
ASTM E178-08 - Dealing with Outlying Observations
ASTM E1795-12 - Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
ASTM E1859/E1859M-11e1 - Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
ASTM E1911-09ae1 - Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
ASTM E1966-07(2011) - Fire-Resistive Joint Systems
ASTM E2030-09a - Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
ASTM E2072-14 - Photoluminescent (Phosphorescent) Safety Markings
ASTM E2073-10 - Photopic Luminance of Photoluminescent (Phosphorescent) Markings
ASTM E2152-01(2006) - Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
ASTM E2153-01(2011) - Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
ASTM E2177-11 - Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness
ASTM E2202-02(2009) - Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
ASTM E228-11 - Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
ASTM E2300-09 - Highway Traffic Monitoring Devices
ASTM E2301-12) - Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
ASTM E23-07ae1 - Notched Bar Impact Testing of Metallic Materials
ASTM E2340/E2340M-11e1 - Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
ASTM E2367-05(2014) - Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
ASTM E2380/E2380M-09 - Measuring Pavement Texture Drainage Using an Outflow Meter
ASTM E2430-05 - Expanded Polystyrene ( x201C;EPS x201D;) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems ( x201C;EIFS x201D;)
ASTM E2532-09 - Evaluating Performance of Highway Traffic Monitoring Devices
ASTM E2560-13 - Data Format for Pavement Profile
ASTM E2561-07a(2012) - Installation of Inductive Loop Detectors
ASTM E2665-08 - Archiving ITS-Generated Traffic Monitoring Data
ASTM E2714-09e1 - Creep-Fatigue Testing
ASTM E274/E274M-11 - Skid Resistance of Paved Surfaces Using a Full-Scale Tire
ASTM E28-14 - Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
ASTM E283-04(2012) - Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
ASTM E2832-12 - Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
ASTM E284-12 - Standard Terminology of Appearance
ASTM E2899-15 - Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM E29-08 - Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E298-08 - Assay of Organic Peroxides
ASTM E303-93(2008) - Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM E308-08 - Computing the Colors of Objects by Using the CIE System
ASTM E313-10 - Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
ASTM E328-13 - Stress Relaxation Tests for Materials and Structures
ASTM E329-11c - Agencies Engaged in Construction Inspection, Testing, or Special Inspection
ASTM E330-02(2010) - Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E331-00(2009) - Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E336-11 - Measurement of Airborne Sound Attenuation between Rooms in Buildings
ASTM E386-90(2011) - Data Presentation Relating to High-Resolution Nuclear Magnetic Resonance (NMR) Spectroscopy
ASTM E4-10 - Force Verification of Testing Machines
ASTM E413-10 - Classification for Rating Sound Insulation
ASTM E449-08(2013) - Analysis of Calcium Chloride
ASTM E477-06a - Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
ASTM E488/E488M-10 - Strength of Anchors in Concrete and Masonry Elements
ASTM E514/E514M-14a - Water Penetration and Leakage Through Masonry
ASTM E534-13 - Chemical Analysis of Sodium Chloride
ASTM E70-07 - pH of Aqueous Solutions With the Glass Electrode
ASTM E72-10 - Conducting Strength Tests of Panels for Building Construction
ASTM E740/E740M-03(2010)e1 - Fracture Testing with Surface-Crack Tension Specimens
ASTM E795-05 - Mounting Test Specimens During Sound Absorption Tests
ASTM E8/E8M-15a - Tension Testing of Metallic Materials
ASTM E800-07 - Measurement of Gases Present or Generated During Fires
ASTM E808-01(2009) - Describing Retroreflection
ASTM E809-08(2013) - Measuring Photometric Characteristics of Retroreflectors
ASTM E810-03(2008) - Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
ASTM E811-09 - Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
ASTM E831-12 - Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
ASTM E84-12a - Surface Burning Characteristics of Building Materials
ASTM E90-09 - Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
ASTM E950/E950M-09 - Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
ASTM E96/E96M-15 - Water Vapor Transmission of Materials
ASTM E965-96(2006) - Measuring Pavement Macrotexture Depth Using a Volumetric Technique
ASTM E976-10 - Determining the Reproducibility of Acoustic Emission Sensor Response
ASTM E991-11 - Color Measurement of Fluorescent Specimens
ASTM F1043-14 - Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
ASTM F1055-13 - Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
ASTM F1057-10 - Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
ASTM F1083-13 - Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
ASTM F1216-09 - Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
ASTM F1249-06(2011) - Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
ASTM F1267-12 - Metal, Expanded, Steel
ASTM F1281-11 - Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
ASTM F1282-10 - Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
ASTM F1292-09 - Impact Attenuation of Surface Systems Under and Around Playground Equipment
ASTM F1336-07 - Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
ASTM F1345-10a(2015) - Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
ASTM F1417-11a(2015) - Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
ASTM F1473-13 - Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
ASTM F1476-07(2013) - Performance of Gasketed Mechanical Couplings for Use in Piping Applications
ASTM F1483-12 - Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
ASTM F1488-09e1 - Coextruded Composite Pipe
ASTM F1504-14 - Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
ASTM F1533-01(2009) - Deformed Polyethylene (PE) Liner
ASTM F1545-15a - Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
ASTM F1553-11 - Specifying Chain Link Fence
ASTM F1554-07ae1 - Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
ASTM F1606-05(2014) - Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
ASTM F1632-03 (2010) - Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
ASTM F1637-10 - Standard Practice for Safe Walking Surfaces
ASTM F1647-11 - Organic Matter Content of Athletic Field Rootzone Mixes
ASTM F1664-08(2013) - Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
ASTM F1665-08(2013) - Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
ASTM F1667-15 - Driven Fasteners: Nails, Spikes, and Staples
ASTM F1668-08 - Construction Procedures for Buried Plastic Pipe
ASTM F1674-05 - Standard Test Method for Joint Restraint Products for Use with PVC Pipe
ASTM F1674-11 - Joint restraint products for use with PVC pipe
ASTM F1675-13 - Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
ASTM F1697-09(2015) - Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
ASTM F1698-02(2015) - Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
ASTM F1732-12 - Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
ASTM F1735-09(2015) - Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
ASTM F1741-08 - Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
ASTM F1743-08 - Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
ASTM F1759-97(2010) - Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
ASTM F1760-01(2011) - Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
ASTM F1815-11 - Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
ASTM F1852-14 - “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
ASTM F1865-09 - Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
ASTM F1866-13 - Poly (Vinyl Chloride ) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
ASTM F1867-06(2012) - Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
ASTM F1871-11 - Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
ASTM F1947-10 - Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
ASTM F1960-15 - Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
ASTM F1962-11 - Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
ASTM F1970-12e1 - Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
ASTM F1974-09(2015) - Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
ASTM F2000-10 - Fences for Baseball and Softball Fields
ASTM F2019-11 - Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
ASTM F2023-10 - Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
ASTM F2049-11 - Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
ASTM F2080-15 - Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
ASTM F2098-08 - Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings
ASTM F2136-08 - Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
ASTM F2159-11 - Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
ASTM F2160-10 - Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
ASTM F2164-13 - Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
ASTM F2176-02(2009) - Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
ASTM F2200-14 - Automated Vehicular Gate Construction
ASTM F2206-14 - Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
ASTM F2217/F2217M-13 - Coating/Adhesive Weight Determination
ASTM F2262-09 - Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
ASTM F2263-14 - Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
ASTM F2280-14 - “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
ASTM F2282-03(2015) - Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
ASTM F2304-10 - Sealing of Sewers Using Chemical Grouting
ASTM F2306/F2306M-14e1 - 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
ASTM F2329-15 - Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
ASTM F2408-11 - Ornamental Fences Employing Galvanized Steel Tubular Pickets
ASTM F2418-13 - Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
ASTM F2433-05(2013) - Determining Thermoplastic Pipe Wall Stiffness
ASTM F2435-15 - Steel Reinforced Polyethylene (PE) Corrugated Pipe
ASTM F2453/F2453M-14 - Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in. [3871 mm] or Less, in Panels or Rolls, with Uniform Meshes
ASTM F2454-05(2010) - Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
ASTM F2482-08(2015) - Load-Indicating Externally Threaded Fasteners
ASTM F2487-13 - Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines
ASTM F2510/F2510M-07(2013) - Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
ASTM F2551-09 - Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
ASTM F2561-11 - Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
ASTM F2562/F2562M-15 - Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
ASTM F2599-11 - The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
ASTM F2611-15 - Standard Guide for Design and Construction of Chain Link Security Fencing
ASTM F2618-09(2014) - Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
ASTM F2619/F2619M-13 - High-Density Polyethylene (PE) Line Pipe
ASTM F2620-13 - Heat Fusion Joining of Polyethylene Pipe and Fittings
ASTM F2634-10 - Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM F2648/F2648M-13 - 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
ASTM F2657-07(2012) - Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
ASTM F2658-07(2013) - Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
ASTM F2686-14 - Glass Fiber Reinforced Thermoplastic Pipe
ASTM F2688-08(2014) - Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
ASTM F2718-09(2015) - Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines
ASTM F2719-09(2015) - Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines
ASTM F2720/F2720M-09 - Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
ASTM F2736-13e1 - 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
ASTM F2737-11 - Corrugated High Density Polyethylene (HDPE) Water Quality Units
ASTM F2762-11e1 - 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F2763-11 - 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F2764/F2764M-11ae2 - 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
ASTM F2787-13 - Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
ASTM F2788/F2788M-13 - Metric-sized Crosslinked Polyethylene (PEX) Pipe
ASTM F2817-10 - Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
ASTM F2829-10 - Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems
ASTM F2831-12 - Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems
ASTM F2832-11 - Accelerated Corrosion Testing for Mechanical Fasteners
ASTM F2833 -11 - Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
ASTM F2854-10 - Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing
ASTM F2880-14 - Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes ¾ in. to 65 in.
ASTM F2881-11(2015) - 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications
ASTM F2922-13e1 - Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
ASTM F2928-13 - Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods
ASTM F2946-12 - PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes
ASTM F2947-14 - 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
ASTM F2969-12 - Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe
ASTM F3000/F3000M-13 - Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats
ASTM F3123-15 - Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)
ASTM F3148-15 - High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
ASTM F355-10a - Shock-Absorbing Properties of Playing Surface Systems and Materials
ASTM F402-05(2012) - Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
ASTM F405-13 - Corrugated Polyethylene (PE) Pipe and Fittings
ASTM F412-12 - Plastic Piping Systems
ASTM F412-15 - Standard Terminology Relating to Plastic Piping Systems
ASTM F436M-11 - Hardened Steel Washers [Metric]
ASTM F437-15 - Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM F438-15 - Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
ASTM F439-12 - Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
ASTM F441/F441M-15 - Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
ASTM F442/F442M-13e1 - Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR)
ASTM F449-02(2014) - Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM F468-13 - Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
ASTM F476-84(2002) - Security of Swinging Door Assemblies
ASTM F477-08 - Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F480-14 - Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
ASTM F483-09 - Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
ASTM F493-14 - Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
ASTM F512-12 - Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
ASTM F537-01(2014) - Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
ASTM F541-12 - Alloy Steel Eyebolts
ASTM F552-14 - Standard Terminology Relating to Chain Link Fencing
ASTM F567-14a - Installation of Chain-Link Fence
ASTM F585-13 - Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
ASTM F593-13a - Stainless Steel Bolts, Hex Cap Screws, and Studs
ASTM F594-09(2015) - Stainless Steel Nuts
ASTM F606/F606M-14a - Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets
ASTM F626-14 - Fence Fittings
ASTM F645-15a - Selection, Design, and Installation of Thermoplastic Water-Pressure Piping Systems
ASTM F654-07(2012) - Residential Chain Link Fence Gates
ASTM F656-15 - Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
ASTM F667/F667M-15 - Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
ASTM F668-11 - Poly(Vinyl Chloride) (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
ASTM F679-15 - Poly (Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
ASTM F714-13 - Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
ASTM F758-14 - Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
ASTM F788/F788M-13 - Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
ASTM F789-95a - Type PS-46 and Type PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings
ASTM F794-03(2014) - Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
ASTM F810-07 - Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption
ASTM F835-13 - Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM F836M-02(2010) - Style 1 Stainless Steel Metric Nuts
ASTM F876-15 - Crosslinked Polyethylene (PEX) Tubing
ASTM F877-11a - Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
ASTM F879-12 - Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
ASTM F88-09 - Seal Strength of Flexible Barrier Materials
ASTM F891-10 - Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
ASTM F894-13 - Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
ASTM F900-11 - Industrial and Commercial Swing Gates
ASTM F901-01(2012) - Aluminum Transmission Tower Bolts and Nuts
ASTM F905-04(2011) - Qualification of Polyethylene Saddle-Fused Joints
ASTM F913-02(2014) - Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
ASTM F934-96(2013) - Standard Colors for Polymer-Coated Chain Link Fence Materials
ASTM F949-15 - Poly (Vinyl Chloride) (PVC) Corrugated Sewer Pipe with a Smooth Interior and Fittings
ASTM F959-13 - Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
ASTM F964-13 - Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
ASTM G10-10 - Specific Bendability of Pipeline Coatings
ASTM G109-07(2013) - Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
ASTM G115-10 - Measuring and Reporting Friction Coefficients
ASTM G12-07(2013) - Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
ASTM G14-04(2010)e1 - Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G147-09 - Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
ASTM G151-10 - Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
ASTM G152-06 - Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G153-04(2010) - Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
ASTM G154-12a (Replaces G53) - Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
ASTM G155-05a - Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
ASTM G162-99(2010) - Conducting and Evaluating Laboratory Corrosion Tests in Soils
ASTM G17-07(2013) - Penetration Resistance of Pipeline Coatings (Blunt Rod)
ASTM G180-13 - Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
ASTM G20-10 - Chemical Resistance of Pipeline Coatings
ASTM G21-13 - Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM G34-01(2013) - Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G48-11 - Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G51-95(2012) - Measuring pH of Soil for Use in Corrosion Testing
ASTM G62-14 - Holiday Detection in Pipeline Coatings
ASTM G7/G7M-11 - Atmospheric Environmental Exposure Testing of Nonmetallic Materials
ASTM G85-11 - Modified Salt Spray (Fog) Testing
ASTM G8-96(2010) - Cathodic Disbonding of Pipeline Coatings
ASTM G90-10 - Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
ASTM G95-07(2013) - Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
ASTM G97-97(2013) - Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM International Manual Series - MNL 17-2ND-EB - Paint and Coating Testing Manual, 15th Edition 2012 - Joseph V. Koleske - Editor
